Posts made by Sunblade

Thank you 2 for the assist. I figured it out. I had to add vendor arch 00009

I probably didn’t do this correctly. I’m not very versed in Debian/Linux. I’ve set this up one other time at my previous job about 3 years ago.

A little bit more background on this. We had FOG before, someone else set it up. It’s since crashed before I arrived and I’m trying to get a new one running. In DHCP, they had ipxe and undionly.

The port I’m using does get an IP and is in the same range as the FOG server.

We are using the new 7010 micros. This one is maybe a few months old.

From the link, https://docs.fogproject.org/en/stable/reference/compile_ipxe_binaries.html I used this command first
./buildipxe.sh

then reinstalled FOG from the original install.
cd fogproject-1.5.10/bin
./installfog.sh

Thank you

Hello,
I have FOG setup and DHCP, but when I boot the PC it hangs at start PXE over IPv4 then says no boot device found in the UEFI.

I have tried the vendor policy with Arch 00007, 8, and 9.

I’ve tried the boot file name (DHCP 67) as undionly.kpxe and ipxe.efi

according to this https://wiki.fogproject.org/wiki/index.php/WorkingDevices
I should use undionly.kpxe

I have DHCP 66 point to the IP address.
Thank you for the help