@Sebastian-Roth Im using ubuntu

yes, I installed it prior to imaging.

I have 30 hosts and I’m running 1.5.7

Is there a way to make the fog management web gui https?

Thanks guys! You all have been so helpful. I figured out that you don’t have to select the FOG Boot screen to select the Hard drive boot. It goes right into pxe.

It’s cut our deploy time from an 1 hour and 15 - 30 minutes to like 10 minutes.

If it becomes a further issue I’ll keep the post deploy scripts in mind.

Thanks again!

So I figured out what the deal is.

When I use REFIND_EFI, I have to pxe boot into the FOG Client menu, then select boot from Hard Disk, which then creates the windows boot manager back into the UEFI allowing windows to boot again.

Okay,

I just captured and deployed using the REFIND_EFI exit method and the windows boot manager is not there now.

I can boot to the OS from the FOG menu, but if I attempt to just boot from the Hard Disk it does not boot.

I was using EXIT prior to this.

I think this may be my issue.

It’s UEFI Boot, not BIOS but the terminology is loosely used.

So if it’s a UEFI boot loader using GPT then I should use REFID_EFI for the capture and deployment?

It’s literally just a blue screen then it cuts back out.

I’m going to reimage using the Dell OS recovery as that reset the BIOS for another machine.

I’m really new to all of this. Reimaging another machine that had the same issue with Dell Recovery OS fixed the boot order in the Bios. I’m going to try to the same on this machine I deployed to and see if that fixes it. I will then attempt another deploy.

I’m not sure what to do for the BIOS exit.

Here is what I have currently.

The machines are the same model with the exact same specs.

Both machines are in UEFI mode.

I did a multiple partition non-partition non-resizable, as well as a single disk resizable and both with the same result.

When I look in the bios the end machine that I captured the image from has windows boot manager in the bios while the one I deployed too does not.