[quote=“Wayne Workman, post: 44976, member: 28155”]Can you edit the script to just take that ONE line out, and do that part manually?
Do you plan on using the new client?[/quote]
Ok Wayne,
Please let me know the script file name and that particular line… I can download the FOG client file file manually.
updated to SVN3200 but the problem remains…
Configuring services.
and breaks the installation…
I updated to Revision 3200 and on installing i get the error
Configuring services.
and breaks the installation
The problematic systems are : HP dx2480, HP dc5850, Dell Vostro 360 and HP Compaq CQ3273
[B]While Dell Optiplex 390 are working fine.[/B]
I updated to the latest svn 2974. But the problem remains the same.
I also isolated the Server and Host from main network and connected them using a separate network switch.
on selecting any of the menu options
‘Perform Full Host Registeration…’ OR
‘Quick Regiseration and Inventory’ OR
‘Client System Information …’
screen displays
/bzimage… ok
/init.xz … ok
After this the same continuous screen display…
‘Sending Discover …’
‘Sending Discover …’
I think I was using svn 26xx version (don’t remember the ‘xx’) of FOG. Can you please tell me from where i can download that version.
Thanks
Now I am having 2950 but the issue remains there.
It was working fine up to Jan 16, 2015, i uploaded and downloaded the images on that day. But i don’t remember the version which i was using. After that I upgraded three or four times from svn.
Is there any updation log on fog server that can tell me which version I was using on Jan.16, 2015.
I have also checked disabling the second DHCP Server, the problem remains there.
I also removed the host from server and tried Full Registration form FOG menu but the same message ‘Sending Discover…’ displays for indefinite time.
Should I try to use FOG 1.2.0. Will my current database support FOG 1.2.0 ?
[quote=“Tom Elliott, post: 41459, member: 7271”]Is it, then, possible you have multiple DHCP servers (maybe using proxyDHCP for pxe boot)?[/quote]
I have two DHCP servers on my network. MAC binding is done for each computer on network on DHCP servers.
Machine is getting the correct IP parameters from FOG Server.
[quote=“Tom Elliott, post: 41456, member: 7271”]Is this a USB device?[/quote]
its not USB device,
On HP Compaq dc5850
Upload image task
IP address is assigned correctly by DHCP.
but it shows the message ‘Sending discover…’ in loop…
[ATTACH=full]1642[/ATTACH]
FOG Version 2942 on XUbuntu 14.04
[url=“/_imported_xf_attachments/1/1642_screenshot.jpg?:”]screenshot.jpg[/url]
solved the problem by recreating these 5 tables with myisam engine and filling the records from old mysql dump.
I have checked the FOG database tables in phymyadmin and found out that there are five tables which are not accessible. On clicking on them phpmyadmin displays the error " #1286 Unknown storage engine ‘innodb’ ".
The tables are:
‘innodb’ engine is disabled in mysql database.
Please guide what should i do.
Should i enable innodb engine ? or
Is it possible to convert the five tables to MyISAM format.
Thanks
Sher
On my Ubuntu 14.04 LTS desktop, I upgraded FOG from version 1.2.0 to 1.3.0. The FOG was upgraded successfully without any warnings.
If there is a database issue how can i figure that out ?
Ubuntu
..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################
###########################################
Version: 1.3.0 Installer/Updater
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.16.0.31
DHCP router Address: 172.16.0.6
DHCP DNS Address: 8.8.8.8
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0
Image Storage Location: /images
Donate: 0
Are you sure you wish to continue (Y/N)
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.
Preparing apt-get
Packages to be installed: apache2 php5 php5-json php5-gd php5-cli php5-mysql php5-curl mysql-server mysql-client isc-dhcp-server tftpd-hpa tftp-hpa nfs-kernel-server vsftpd net-tools wget xinetd sysv-rc-conf tar gzip build-essential cpp gcc g++ m4 htmldoc lftp openssh-server php-gettext
Skipping package: apache2 (Already installed)
Skipping package: php5 (Already installed)
Skipping package: php5-json (Already installed)
Skipping package: php5-gd (Already installed)
Skipping package: php5-cli (Already installed)
Skipping package: php5-mysql (Already installed)
Skipping package: php5-curl (Already installed)
Skipping package: mysql-server (Already installed)
Skipping package: mysql-client (Already installed)
Skipping package: isc-dhcp-server (Already installed)
Skipping package: tftpd-hpa (Already installed)
Skipping package: tftp-hpa (Already installed)
Skipping package: nfs-kernel-server (Already installed)
Skipping package: vsftpd (Already installed)
Skipping package: net-tools (Already installed)
Skipping package: wget (Already installed)
Skipping package: xinetd (Already installed)
Skipping package: sysv-rc-conf (Already installed)
Skipping package: tar (Already installed)
Skipping package: gzip (Already installed)
Skipping package: build-essential (Already installed)
Skipping package: cpp (Already installed)
Skipping package: gcc (Already installed)
Skipping package: g++ (Already installed)
Skipping package: m4 (Already installed)
Skipping package: htmldoc (Already installed)
Skipping package: lftp (Already installed)
Skipping package: openssh-server (Already installed)
Skipping package: php-gettext (Already installed)
Confirming package installation.
Configuring services.
Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
Copying back any custom hook files.
Copying back any custom report files.
You still need to install/update your database schema.
This can be done by opening a web browser and going to:
Press [Enter] key when database is updated/installed.
Setup complete!
You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.
This can be done by opening a web browser and going to:
[url]http://172.16.0.31/fog/management[/url]
Default User:
Username: fog
Password: password
thanks
Dear Robin,
I tried. There is Operating System option but no drop down list for it. You can check from the screen shot attached herewith.
thanks
[url=“/_imported_xf_attachments/1/1527_screenshot.png?:”]screenshot.png[/url]
I am using FOG 1.2.0 and trying to create a new blank image of Windows 7 64 bit OS through Image Management. After filling all information i clicked on ADD button and get the message/error "An Operating System is required ".
Please tell where to add/assign the Operating System to the image.
Thanks
Sher