@george1421
Yes i have made sure that all drivers and firmware are up to date. To confirm the Laptop is a Lenovo Yoga 11e sorry for the N. I can get it to boot without issue but no matter the choice in the boot menu from fog server besides boot to HDD. The laptop has the error that we are talking about. Does anyone have any further suggestions or ideas to try? The network is ipv4 base with no ipv6 dhcp setup only ipv4. Thanks everyone for the help.

@george1421 said in After installation of Windows 10 pro PC gets caught in a loop and will not boot to HDD.:

ipxe.efi.

Yes it was a typo i’m using ipxe…efi

@Sebastian-Roth I have made one image and can deploy that one without issue. This failure is coming on a Lenovo yoga 11n. Using the lab. It pixe boots without fault. When I pick to register the laptop is when the error happens. I have the stock fog install. I’m using UEFI boot on the laptop and disabled safe boot. Trying to build the image to deploy for teachers. I’m using ipxe.epl for the file if this matters. Thanks. If you want me to try something let me know.

root@Fog:~# ls -al /var/www/html/fog/service/ipxe/init*
-rw-r–r-- 1 fogproject www-data 18839868 Jul 11 07:41 /var/www/html/fog/service/ipxe/init_32.xz
-rw-r–r-- 1 fogproject www-data 19662688 Jul 11 07:41 /var/www/html/fog/service/ipxe/init.xz

root@Fog:~# ls -al /var/www/html/fog/service/ipxe/bzImage*
-rw-r–r-- 1 fogproject www-data 8381088 Jul 11 07:41 /var/www/html/fog/service/ipxe/bzImage
-rw-r–r-- 1 fogproject www-data 7802816 Jul 11 07:41 /var/www/html/fog/service/ipxe/bzImage32
root@Fog:~#

root@Fog:~# file /var/www/html/fog/service/ipxe/init*
/var/www/html/fog/service/ipxe/init_32.xz: XZ compressed data
/var/www/html/fog/service/ipxe/init.xz: XZ compressed data
root@Fog:~#

root@Fog:~# ls -al /var/www/html/fog/service/ipxe/bzImage*
-rw-r–r-- 1 fogproject www-data 8381088 Jul 11 07:41 /var/www/html/fog/service/ipxe/bzImage
-rw-r–r-- 1 fogproject www-data 7802816 Jul 11 07:41 /var/www/html/fog/service/ipxe/bzImage32
root@Fog:~# file /var/www/html/fog/service/ipxe/init*
/var/www/html/fog/service/ipxe/init_32.xz: XZ compressed data
/var/www/html/fog/service/ipxe/init.xz: XZ compressed data
root@Fog:~# file /var/www/html/fog/service/ipxe/bzImage*
/var/www/html/fog/service/ipxe/bzImage: Linux kernel x86 boot executable bzImage, version 4.19.36 (jenkins-agent@Tollana) #1 SMP Sun Apr 28 18:10:07 CDT , RO-rootFS, swap_dev 0x7, Normal VGA
/var/www/html/fog/service/ipxe/bzImage32: Linux kernel x86 boot executable bzImage, version 4.19.36 (jenkins-agent@Tollana) #1 SMP Sun Apr 28 16:59:45 CDT , RO-rootFS, swap_dev 0x7, Normal VGA
root@Fog:~#

Thank you for helping @Sebastian-Roth

@george1421
This is the issue I’m having now.

bzImage… ok
Could not select : Exec format error (http://ipxe.org/2e008081)

Could not boot: Exec format error (http://ipxe.org/2e008081)

Could not boot: Exec format error (http://ipxe.org/2e008081)

It says that the rom is too big for legacy boot. On a Lenova Yoga n11 it will not chain load

Ok figured out how to get it to boot to hard drive. On host EFI exit type i changed it to REFIND_EFI. Now if anyone can help me figure out the best way to get legacy to boot to the fog server i would appreciate it a lot. Thanks

Fog Version Is (Version 1.5.6)

Server Is
root@Fog:/opt/fog_stable/bin# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.6 LTS
Release: 16.04
Codename: xenial

Desktops deploying image on is
Dell Inc.
System Product OptiPlex 3010
System Version 01
System UUID 4c4c4544-0042-4a10-8038-b6c04f465831
System Type Type: Desktop
BIOS Vendor Dell Inc.
BIOS Version A09
BIOS Date 01/31/2013
Motherboard Manufacturer Dell Inc.
Motherboard Product Name 042P49
Motherboard Version A01
CPU Manufacturer Intel Corporation
CPU Version Intel Core i5-3470 CPU @ 3.20GHz
CPU Normal Speed Current Speed: 3200 MHz
CPU Max Speed Max Speed: 3200 MHz
Memory 3.75 GiB
Hard Disk Model WDC WD5000AAKX-75U6AA0

For pxe I’m using
ipxe.efi

Thank you for the help im stuck atm. If it helps i can do the deployment in UEFI or Legacy just can’t get the machines to boot to legacy.
Again thanks for the help