Sorry guys, the issue was that this particular unit had 2 hard drives, so selecting single disk was the issue.

All good now.

Sorry guys, the issue was that this particular unit had 2 hard drives, so selecting single disk was the issue.

All good now.

Hi,
I have Fog 1.5.9 with 5.10.71 TomElliott 64 Kernel. When capturing a Dell Optiplex 7090 Win11 with Uefi using single disk resizable, It goes thru the motion very quickly.

When checking file size of the image, I have:
d1.fixed_size_partitions 2bytes
d1.mbr 1MB
d1.minimum.partitions 511byes
d1.original.fstypes 20bytes
d1.orginal.swapuuids 0bytes
d1.partitions 511bytes
d1p1.img 5.5kB
d1p2.img 144.1kB

It’s not capturing the data. Any help or guidance would be greatly appreciated.

@george1421

So I ended up building a new FOG server and this time everything worked as it should. Not sure what was causing the old server to act that way, but even after manually downloading and saving the new files, it still showed the old version.

Anyhow, thanks for your guidance with this.

Rocky

@george1421

Attached is the pic. For whatever reason, the kernel is not the correct one, eventho the update said it worked.

Hi Sebastian,

I did see the post and followed those instructions, however, mine just does not find a network.

Intel Ethernet l219-LM
PCI\VEN_8086&DEV_0D4C

Hey guys,

Hoping you could help. I have new Dell Optiplex 5080 desktops which I’m trying to create an image for. It gets to the menu but then says “No Network Interfaces found, your kernel is most probably missing the correct driver”

I’ve updated the kernel to 5.6.18 but still cannot get it to go past that error.

Any pointers?

Thanks,

Rocky