and yes I have an internet connection on the box, I can ping Google and other such sites
Posts made by Psycholiquid
-
RE: Trunk Update Failing
-
Trunk Update Failing
Trying to update to latest trunk failing on Adding needed repository.
help?
I am using SVN from Sourceforge, if that is incorrect let me know I will adjust.
-
RE: AutoLogon fails after OOBE
I will take a look at this once I get it settled in the environment. The way I got around it for now was to create the SetupComplete.CMD file and put what I needed in there so it would start the FOG service once imaging was complete and it is working good now.
I’m not a coder so it all looks like Greek to me but I know I can figure out what I am looking at. And thank you for the suggestion.
-
AutoLogon fails after OOBE
I had my image made and have done this for years. Somehow my dummy self messed up and rebooted the image with the unattend.xml in the sysprep folder.
Now the Administrator password is not blank and when I run OOBE it says “user name and password incorrect”
Does anyone have any idea on how to get this back to blank.
I have done the following:
Reset and pressed OK with nothing there.
Hit enter to just allow for a blank password
Ran the NT Password Recovery disk and chose to blank the password form it.No dice on any of that. I have to be missing something, like a reg key or something. I have scoured the internet for days. I might need fresh eyes if anyone has any ideas.
-
RE: Rename fails but adds client to domain.
It was my compression I get around 1 gig now once I turned it down a bit
-
RE: Rename fails but adds client to domain.
OK fully updated and the SetupComplete.cmd in place working like a champ now.
I would like to know why I have to add those lines maybe something that should be put in a FAQ somewhere.
But all in all working like a champ and the business loves it.
Thank you all for helping on this . I’m sure I’ll be back with something else soon.
-
RE: Rename fails but adds client to domain.
OK this morning with SVN still being down (Thanks Sourceforge) I decided to try installing the 0.9.4 client and use it with teh SVN3702 server. So far I am now able to image and rename acomputer and add it to the domain, I am attempting a dual image now to see if both rename and add to the domain without issue. If all goes well then I will just wit for SVN to come back up and update to the latest trunk and retest.
On a side note anyone able to get their upload to the FOG server to be any faster than 500MB a min. Painfully slowing the process down. Imaging is super fast getting 8GB a min.
-
RE: Rename fails but adds client to domain.
Ok using SVN 3702 with Client 0.9.0 I am getting the following happening:
I create the image in Audit mode
Install all software and updates Install FOG Service software 0.9.0In the SetupComplete.bat I have the following commands
sc config FOGService start= auto
net start FOGServiceSet windows to OOBE and reboot uploading image to FOG server.
Once complete I push the image out to one of the hosts I have setup in FOG right now. IT runs through the whole image setup and completes to the Desktop.
From there is joins the domain without trying to rename the computer at all. This create a problem as there will be multiple computers all trying to join the domain under the same name causing a trust issue in the process.
Here is the log from the computer I just did. Keep in mind this one is constantly rebooting due to it trying to change the name after it has already joined the domain:
-
RE: Rename fails but adds client to domain.
@Tom Elliot I will give that a try and see what happens. I’ll report back with results.
-
RE: Rename fails but adds client to domain.
@cml It is now happening on all models. It is almost like there is an issue with me installing the client before sysprepping the machine. I can put my finger on what is happening. I can say once I manually rename the computer it stops rebooting, but since I changed to matching the client with teh server now no machine will rename, but will still add it to the domain which is causing big issues with having multiple machines trying to be the same machine all th time.
-
RE: Rename fails but adds client to domain.
OK tried rolling back and reinstalling the Dev-Branch. Still breaking my whole setup doing that. Is the old 0.3.2 version still stable? I never recall having all these issues in that version at all.
-
RE: Rename fails but adds client to domain.
Also missing what version it is now on the cloud, not sure if this helps with what is going on?
-
RE: Rename fails but adds client to domain.
@Jbob , Well that made matters worse. Now it dropped my hosts out of FOG (Master Image Host) I cant add it back in for some reason, whether manually or automatically. I cant edit hosts, I get a blank screen when I try to edit or delete them like that web host is messing up or something. I add a deployment and the machine reboots but never starts the deployment. I am seeing the FOG PXE boot however. I have the server snapshotted so that isn’t a big deal I can roll back but not sure where to go from here.
Not mad or anything so please don’t read it as such. Appreciate all you guys do.
-
RE: Rename fails but adds client to domain.
@Jbob I appreciate it I will upgrade and reinstall client and report back. Hopefully this will fix it. I have never had this many problems with FOG I am beginning to think I am cursed.
-
RE: Rename fails but adds client to domain.
Do you have a link handy on how to switch it over to using GIT instead of Sourceforge since it look like they will be down for a bit longer than I am willing to wait LOL.
-
RE: Rename fails but adds client to domain.
@Jbob Can I just use the client and not upgrade the whole server or do I need to update both? Just trying to make sure I run like I should. I am getting so close to having this licked so I can start making use of the system.
-
RE: Rename fails but adds client to domain.
@ch3i Those are the logs from before the upload of the image, so what you are seeing is the master images MAC. If you scroll through you will see it changes after timelog 8:42 this is the time of the machines coming up. So basically I have Win7 machine in Audit mode when I install the FOG service, then run sysprep and upload. That is where the beginning of the log files starts.
-
RE: Rename fails but adds client to domain.
@ch3i I am not seeing that in the logs:
Testing-PC
7/20/2015 9:58 AM Client-Info Version: 0.9.0
7/20/2015 9:58 AM HostnameChanger Running…
7/20/2015 9:58 AM Middleware::Communication URL: http://10.20.60.14/fog/service/servicemodule-active.php?moduleid=hostnamechanger&mac=18:03:73:4A:D5:EE||00:00:00:00:00:00:00:E0&newService=1MCO-Spare
7/20/2015 8:58 AM Client-Info Version: 0.9.0
7/20/2015 8:58 AM HostnameChanger Running…
7/20/2015 8:58 AM Middleware::Communication URL: http://10.20.60.14/fog/service/servicemodule-active.php?moduleid=hostnamechanger&mac=F8:B1:56:B5:EE:31||00:00:00:00:00:00:00:E0&newService=1