Hi Again
I recently finished with the correct config for PXE gparted. Now im trying to figure out Hiren Boot CD 1.0.2. Anyone did it with that version that actually works?
I Use the parameters below but with 12GB Ram i get The Not enough space error
initrd tftp://${fog-ip}/fog/hbcd/HBCD.iso
chain memdisk iso raw ||
boot || goto start
@george1421 You helped a bunch my friend
i did some tweaking and now is works, here is the menu parameters for latest gparted:
kernel tftp://${fog-ip}/fog/gparted/live/vmlinuz
initrd tftp://${fog-ip}/fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live config components union=overlay username=user noswap noeject vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
boot || goto MENU
Keep in mind that the photo is EFI, if i do Legacy is downloads it and then comes to the same error
@george1421 Thanks for helping man
Here is the file output:
#!ipxe
set fog-ip 10.0.0.2
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://10.0.0.2/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item g.parted Gparted
item os.hiren Hiren
item os.hiren2 Hiren2
item bd.hiren Hiren
item os.laze Lazesoft
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:g.parted
kernel /fog/gparted/live/vmlinuz
initrd /fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
param sysuuid ${uuid}
:os.hiren
initrd http://${fog-ip}/fog/iso/hbcd/hbcd.iso
kernel http://${fog-ip}${path}/casper/vmlinuz.efi || read void
initrd http://${fog-ip}${path}/casper/initrd.lz || read void
imgargs vmlinuz.efi root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp splash quiet – || read void
boot || goto MENU
param sysuuid ${uuid}
:os.hiren2
kernel /fog/hbcd/live/vmlinuz
initrd /fog/hbcd/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
param sysuuid ${uuid}
:bd.hiren
initrd http://${fog-ip}/images/tools/hbcd/HBCD_PE_x64.iso
chain memdisk iso raw ||
boot || goto start
param sysuuid ${uuid}
:os.laze
initrd http://${fog-ip}/fog/iso/laze/lsboot.iso
chain memdisk iso raw
param sysuuid ${uuid}
:bootme
chain -ar http://10.0.0.2/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot
@george1421 ![alt text]
Im confused too. i attach an image!
@george1421 said in Version 1.5.9 default directory for iso:
file /tftpbboot/fog/gparted/live/vmlinuz
Its the right path,
[root@bootserver html]# file /tftpboot/fog/gparted/live/vmlinuz
/tftpboot/fog/gparted/live/vmlinuz: Linux kernel x86 boot executable bzImage, version 5.10.0-8-amd64 (debian-kernel@lists.debian.org) #1 SMP Debian 5, RO-rootFS, swap_dev 0x6, Normal VGA
@george1421 said in Version 1.5.9 default directory for iso:
/fog/filesystem.squashfs
so here is the current config, with all the paths checked.
kernel /fog/gparted/live/vmlinuz
initrd /fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
Error
Could not select: Exec format error
im kinda lost. Most of the info online are for the older versions.
@sebastian-roth said in Version 1.5.9 default directory for iso:
depends on how you wa
I think i figured out how the directories work. Now i upload and extract Gparted inside /tftpboot/gparted and i set these parameters according to a tutorial i found online:
kernel fog/gparted/live/vmlinuz
append initrd=fog/gparted/live/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
The client gives me the following error:
fog/gparted/live/vmlinuz…ok
append command not found
Any tutorials or examples for 1.5.9 that work?
Hello World 
New with FOG here and im trying to use it for pxe boot. I do find tutorials online for older versions mentioning that the images should go under root-tftpboot but on the new version the directories are different. so where do i upload iso’s for pxe in this version.
thank you for your help in advance