Posts made by pa_fog_man

I am using a Dell Opitplex 390. When I boot using legacy with ipxe.pxe everything seems to work. How can I get it to work using UEFI. Even getting the option to come up using just UEFI as an option. I select it in the bios but not an option when booting.

I meant no opt 60. I changed the DHCP to use ipex.efi and now I get error PXE-E79:  NBP is too big to fit in free base memory. Using dhcp server from windows 2008 server.

@george1421 said in pxe boot/fog menu:

Lets start out with some basics.

What you do have configured for dhcp options 66 and 67. Also be sure you don’t have dhcp option 60 set.
What model of dell computer is this?
Is this computer in uefi or bois mode?
Is the target computer and the fog server on the same subnet?

Tried on a laptop and also desktop
opt 66 fogserver IP
opt 67 undionly.kpex
No out 60
Tried on same network and different network.

I setup a new fog server 1.5.4 and when I boot a computer via pxe boot, The fog menu comes up but then disappeared after a second and then all i had is a blinking cursor. Tried with a laptop and it also connected for a second then the backround went away had black screen with the works but can not do anything, Seems like it connects for a second and then disconnect. Dell computers. Any ideas?