Posts made by oz.agoston

Unfortunately our bosses wouldn’t want us to use the windows DHCP server for the FOG server to avoid possible network problems. Hence we tried to set up the whole thing in an isolated environment to be able to deploy the images with an unmanaged switch (and maybe use it this way in the future) but we had no luck. After hours of troubleshooting we finally met the last problem, DHCP server no subnet declaration for ensp2s0. We tried everything we could find online to make changes in the config files but we just couldn’t solve it. If there are some further suggestions we would gladly try them.

Thank you both. I will try to set up the DHCP options correctly today and will give a feedback. Unfortunately there is no error code created by the target computer because it is stuck in a loading loop, likely because it can’t access the data without the above mentioned settings.

Hello everyone,

I would like to ask for some help. We installed our first ever FOG server on Ubuntu Server 22.04 LTS and immediately ran into some problems. We configured our installation without the DHCP option because we already have a DHCP server in our network and we went without HTTPS support. We were able to log into the Web UI and managed to install the FOG client to the test PC which runs Windows 10 Pro. Unfortunately the windows PC can’t PXE boot and we can’t upload our first image. The strange thing is that it can ping the FOG server and the FOG client even tells us that there is a task pending and we need to restart the windows PC. What options did we mess up or what install and setup steps did we miss? Any help would be appreciated. Sorry if there are posts like this already answered. I tried to find one which describes our situation, to no avail.