@Sebastian-Roth said in could not map attribute 0x80 in inode FOG 1.5.9:
@Noseman said in could not map attribute 0x80 in inode FOG 1.5.9:
I have exactly the same problem in FOG 1.5.0.
I hope you mean 1.5.10!?
Now on your issue, made sure fast boot is disabled??
Hi @Sebastian-Roth ,
thank you for answering.
You mentioned right, it is 1.5.10. 
I said, no dirty bit set, so this means also no fast boot to me,
After my post I was fiddling around:
- Testing RAM, not with included memtest over pxe, because it does not work, I tried the memtest86 (6.x) included in the proxmox iso, uefi booted via ventoy. - RAM OKAY
- Taking an image with Trueimage, no errors - works
- Changing to a new SSD, and deploying the Trueimage image onto. - works
- After that capturing the machine via fog. - works without errors
- Deploying the captured image in the old (not captureable) SSD - works
- Capturing this again, from the (not captureable) SSD works now flawlessly.
- Tested this on both machines several times, works absolutely fine.
- On the other machine I tried deploying the image from trueimage directly onto the “not captureable” ssd, which saves some time and works also with capturing from fog afterwards.
I would call this a workaround, and it did the trick, but WTF was the problem?
Happy 
sunday!