Problem solve !

My option in the Windows DHCP scope, 66 and 67 was not correctly applied, don’t ask me why…

Hello there,

Well i’m trying to set up a Fog server, release 0.32 on an Ubuntu Server 10.04 LTS machine.

Im using a virtual machine on an Esx 4 cluster but I don’t think that my trouble is coming from there.

The installation of Fog is working fine, I’m able to reach the web interface from a client on the network.

I’m using 2 DC on 2003 Server, I correctly set up the DHCP option 66 with the Fog server ip address and 67 with the pxe image boot “pxelinux.0”

I’m able to ping my fog server, i’m able to get the pxe file by using in a prompt the following command line :
tftfp -i 192.168.x.x get pxelinux.0

When trying to boot on lan with client I’m getting back the error message PXE-E53 : No boot filename received

Any idea ?

Thank’s for the tips !!
I finally use EXT3 and everyting is working fine now.

Regards,

Hello,

I’m actually using a Fog server 0.32 and looking to upload some Linux image.

Wich system files is supporting Fog ?
I get some trouble by using EXT4, should I use EXT3 ? Is the LVM supported ?

I remove the swap partition and use a single partition EXT3.

I’m actually working with an host using Ubuntu Server 11.04 i386

The upload of the host image is not always working, sometime it just create the mbr and img files, the host is working during a very short instant and display the message “Image uploaded” and “Task complete!”

Any idea ?