@george1421 It’s now working, as i’ve installed so many times this time around I forgot to open the web panel and import the configuration

thanks for your help

@george1421 Storage node has the correct IP and looking through settings the correct IP’s are set too. I am not using DNS, could this be an issue?

@george1421 What I mean is there is a problem with the installer as I’ve tried Debian, Ubuntu and all the same issue, I will check the configuration now.

@george1421 said in Layer 2 Network - Isolated Network:

storage node

I have tried multiple machines and they all seem to be having the same issue though. I will check the settings now.

I have done a fresh install of FOG 1.5.4 on my Virtual Machine, I had to make some changes to the DHCPD.conf file as it was pointing to another IP Address and now this is the error I am getting.

@george1421 I have got DHCP working and it now assigns an IP address but it says “TFTP Error - File not found”

I am not at the office anymore but maybe I could setup Fog Server in a VM and then bridge to the network, will this work too? Plug my laptop into the switch - fire up the VM and it will work as if it was a dedicated host machine?

Hello,

I want to setup a FOG Server on an isolated network, but I cannot get it to work.

I have a Cisco Switch and the server plugs directly into the switch and I assign a static IP address (192.168.0.100) and then install the FOG Server using the wireless network to grab the files.

On the FOG Server I can open http://192.168.0.100/fog/management so the server is live but any machine I plug into the switch and attempt PXE it will not boot, DHCP was enabled during the setup.