@george1421 yeah its on the same network
Posts made by multipass
-
RE: PXE Boot not working - Windows 2019 DHCP
-
RE: PXE Boot not working - Windows 2019 DHCP
@george1421 that was a typo in the thread, ive changed option 67 to ipxe.efi and I’ve now noticed that on a UEFI machine I very briefly get the below
NBP filename is ipxe.efi
NBP filesize is 0 bytes
PXE-E99: Unexpected Network Error. -
RE: PXE Boot not working - Windows 2019 DHCP
@jj-fullmer This is a completely new setup.
Are there any guides you’ve seen for moving the TFTP share?
-
PXE Boot not working - Windows 2019 DHCP
Hey,
I’m having trouble getting my machines to boot to FOG.
On a BIOS machine it just times out at the TFTP stage
On a Lenovo UEFI machine I just get “boot failed”
I have disabled secure boot.I am running FOG on a Debian 11 VM on an ESXI host
our DHCP server is a windows 2019 serverI’ve set option 66 to the IP of the fog machine
option 67 is udionly.kpxeI did follow the windows 2012 settings in this guide but it didn’t help
https://wiki.fogproject.org/wiki/index.php/BIOS_and_UEFI_Co-Existence#Using_Windows_Server_2012_.28R1_and_later.29_DHCP_PolicyI’ve probably done something wrong (I blame the UK heatwave) so I’m hoping someone can hold my hand and help me out.
Cheers