Posts made by Mike2014

I will try this first thing in the morning. A couple of questions: Is there a USB to Ethernet that you would recommend for this HP Stream 11 pro?

This USB to Ethernet was recommended by HP. I will contact them again to see if they have another USB to ethernet that may work better. Can you tell me what specifications are required for iPXE to work 100%.

Ok. Awesome. Thank you very much.

Revision 3148, correct?

Message: “No bootable device-- insert boot disk and press any key”

[url=“/_imported_xf_attachments/1/1809_NoBootableDevice.jpg?:”]NoBootableDevice.jpg[/url]

If I use undionly.kkpxe it locks up here: “/bzImage… Ok — /init.xz… OK”
If I use undionly.kpxe it locks up here: “iPXE initialising devices…”

[S]Yes.[/S] I tried both.

Updated to 3141 and checked the FOG kernel debug but still getting the same message: “/bzImage… Ok — /init.xz… OK”

8:34am

[url=“/_imported_xf_attachments/1/1807_update.jpg?:”]update.jpg[/url]

I get this after I select: “Quick Registration and Inventory” from the FOG menu. I checked /var/log/apache2 but there are no errors about this…

[url=“/_imported_xf_attachments/1/1805_init-xz-ok.jpg?:”]init-xz-ok.jpg[/url]

It boots past init.xz…ok and locks up.

Here is the output of “lsusb -t”

[url=“/_imported_xf_attachments/1/1804_lsusb-t.jpg?:”]lsusb-t.jpg[/url]

We have an HP USB Ethernet Adapter
[url]http://h30094.www3.hp.com/product.aspx?sku=10297330&pagemode=ca[/url]

Asix USB Dongle…

[url=“/_imported_xf_attachments/1/1803_AsixUSBDongle.jpg?:”]AsixUSBDongle.jpg[/url]

Here you go…

[url=“/_imported_xf_attachments/1/1802_HPStream.jpg?:”]HPStream.jpg[/url]

We are using this USB to ethernet: [FONT=Calibri][COLOR=#1f497d]USB to Ethernet adapter (XZ613AA)[/COLOR][/FONT]

Were you able to upload an image with this model? We received one and we are experiencing the same results with FOG 1.2.0. I also tried the latest SVN today with the latest stable kernel and Tom’s kernel. I am using ubuntu 14. Any suggestions will be appreciated.

[url=“/_imported_xf_attachments/1/1801_hp.jpg?:”]hp.jpg[/url]

I uploaded and downloaded images to several models with no problems. This is using the latest install (1.2.0) and upgrading to SVN 2414. I have a Lenovo Yoga with no ethernet port. Following the instructions above I get a black screen with a flashing cursor right after it asks me to unplug the USB adapter and stays like that permanently

So I downgraded to SVN 2306 and imaging went much further with Capone but I get a black screen with the flashing cursor right after it checks the HDD.
I can no longer manually register a host with this SVN.

Sorry— I left work so I don’t have any log files to provide. I will probably reinstall FOG and go straight to 2306 and test it again.

Any suggestions…

I installed the latest kernel from the FOG Management site.
This is on Ubuntu 12.04

FOG Version 1.2.0 -> 2414 > 2306

Thank you for that information. I now know how to retrograde. I am still having issues with the Lenovo Yoga tablets that don’t have ethernet ports. I will follow up on this thread: [url]http://fogproject.org/forum/threads/ipxe-boot-issue-with-realtek-rtl8153.10507/#post-36781[/url]

I found this:
[url]http://fogproject.org/forum/threads/ipxe-boot-issue-with-realtek-rtl8153.10507/#post-36781[/url]

and want to try SVN 2306

I installed SVN 2414. Is there a way to install a different version. When I go here:

[URL=‘https://svn.code.sf.net/p/freeghost/code/trunk’][COLOR=#3366bb][FONT=monospace]https://svn.code.sf.net/p/freeghost/code/trunk[/FONT][/COLOR][/URL]

It gives me the latest one.