Hello,
We bought new computers from HP in Generation 8 and it seems that the Legacy option is no longer possible …
I tried to change the Filename to “ipxe.efi” otherwise I had nothing at all and I end up with an error message that I do not understand.
>>Start PXE over IPv4.
Station IP address is 192.168.1.206
Server IP address is 192.168.0.200
NBP filename is ipxe.efi
NBP filesize is 1044256 Bytes
Downloading NBP file...
NBP file downloaded successfully.
iPXE initialising devices... ok
iPXE 1.20.1+ (g4bd0) -- Open Source Network Boot Firmware -- http://ipxe.org
Features : DNS FTP HTTP HTTPS iSCSI NFS TFTP SRP VLAN AoE EFI Menu
Waiting for link-up on net0..... ok
Configuring (net0 xx:xx:xx:xx:xx:xx)................. No configuration methos succeeded (http://ipxe.org/040ee186)
Configuring (net0 xx:xx:xx:xx:xx:xx)................. No configuration methos succeeded (http://ipxe.org/040ee186)
DHCP failed, hit 's' for the iPXE shell; reboot in 10 seconds
Can anyone tell me how to fix this error?
For information, my Fog is installed on an Ubuntu server and the DHCP server is managed by UniFi
(in Legacy mode I never had any problems)
Thank you