Posts made by luiztpd

@george1421 Thanks for the reply, I’m glad to hear that the project is not finished. Where can I find this tutorial?

I would like to know if the project was closed, as the last update was in 2020?

We created an image based on windows 10 on a 1Tb disk, after implementing it on a 500gb disk, windows presented an error on startup.

NOTE: We had no problems when we implemented the same image on a disk of the same size of 1Tb.

Good morning, I would like help because the WOL Broadcast Management plugin did not work and no error msg was displayed.

• my server fog is with network ip address 192.168.x.x / 24;
• the workstations are in a vlan 172.x.x.x / 24 and other 172.x.x.x / 21! - fog version: 1.5.4

@george1421 Thank you!
As a precaution I have created all my images outside A.D

SOLVED

@george1421 All the reference images I created are not associated with AD.

I imagine the following scenario:

1 - I have standard images that are not associated with Ad;
2 - I capture the image on a computer “A” for the first time and it is inserted in the AD normally;
3- Months later I need to clone host “A” again, can I have problems? how does client fog handle it?

Dear, how does the fog client work when deploy is executed on a host that was previously joined to the AD domain?
I before deploy I need to delete the host name of AD?

problem solved!
In fog settings >> Ad default OR I have filled in the fields in small as an example:
or = xxxx, dc = yyy, dc = zzz
Thank you all

What is the function of the parameter: "Name Change / AD Join Forced reboot?

@Sebastian-Roth
After checking the log, I found the message: HostnameChanger The parameter is incorrect, code = 87.

What are the hostnameChanger paramatars?

I’m having difficulty configuring the ability to insert computers into the domain after image deploy, I ran the procedure as follows:

1- When registering the host I informed that it would be inserted in domain (y);
2 - configure in fog system settings >> Active directory default the options of my domain;
3-I installed the fog client on the host;

After deploy the computer was not entered into the domain, but no error message was displayed. I would like help.

In terms of single disk productivity is the best option because the clone of this image was on average 30 minutes in multicast mode, when I used multiple partition the time to clone the image was in 2 hours and 30 minutes.

I created an image using the multiple partition image - single disk (not resizable), and the image size was 223gb (the full size of the disk).
When I used the single disk (resizable) option the image size was 20gb.

What’s the difference between the options?

@Tom-Elliott said in Error Fog Client:

Finding out why it’s unable to install would go a lot further of course

I downloaded the certificate to the computer and installed it manually, however when trying to install the client error continued;
The user I use to install is a computer administrator;
Windows user account control disabled;
Windows Firewall disabled.

@Wayne-Workman
I’ve already disabled antivirus.
Windows 7 64bits.

Server

• FOG Version: 1.4.1
• OS: Debian

Client

• Service Version:
• OS: Windows
  Error installing fog client,The error occurs at the moment of “pinning”
  

@Tom-Elliott said in Debbuger.exe:

when running the isntaller, are you setting the IP address portion to your actual FOG Server’s IP Address?

yes, I am setting the ip address.

@Tom-Elliott said in Debbuger.exe:

The error message tells you exactly why it’s not able to install, the debugger would not help you in regards to this.
Your fogserver is running too? What version of fog are you running?

Version 1.4.1 e client 0.11.12

@Tom-Elliott

Thanks,Thanks, I was able to list the commands…
I am trying to use the debugger to find out what is causing error when installing the fog client.
can you help me?

I would like help with using debugger.exe
What are the commands?