Posts made by louis

Got to admit that I’m stuck here. Tried everything. Reinstalled, deleted database. It all goes in. Log onto web gui and can’t connect to default storage node. All passwords, encrypted or not confirmed the same but it still doesn’t work.

any chance that somebody could post up their config with regards to what their tftp settings are in both:
/fog/commons/config.php & other seetings.

things driving me round the bend now. I just can’t see anything wrong.

[B]my config.php[/B]

define( “IS_INCLUDED”, true );
define( “TFTP_HOST”, “192.168.254.11” );
define( “TFTP_FTP_USERNAME”, “fog” );
define( “TFTP_FTP_PASSWORD”, “hello123” );
define( “TFTP_PXE_CONFIG_DIR”, “/tftpboot/pxelinux.cfg/” );
define( “TFTP_PXE_KERNEL_DIR”, “/tftpboot/fog/kernel/” );
define( “PXE_KERNEL”, “/tftpboot/fog/kernel/bzImage” );
define( “PXE_KERNEL_RAMDISK”, 127000 );
define( “USE_SLOPPY_NAME_LOOKUPS”, “1”);
define( “MEMTEST_KERNEL”, “/tftpboot/fog/memtest/memtest” );
define( “PXE_IMAGE”, “/tftpboot/fog/images/init.gz” );
define( “PXE_IMAGE_DNSADDRESS”, “” );
define( “STORAGE_HOST”, “192.168.254.11” );
define( “STORAGE_FTP_USERNAME”, “fog” );
define( “STORAGE_FTP_PASSWORD”, “hello123” );
define( “STORAGE_DATADIR”, “/fogimages/” );
define( “STORAGE_DATADIR_UPLOAD”, “/fogimages/dev/” );
define( “STORAGE_BANDWIDTHPATH”, “/fog/status/bandwidth.php” );
define( “CLONEMETHOD”, “ntfsclone” ); // valid values partimage, ntfsclone
define( “UPLOADRESIZEPCT”, 5 );
define( “WEB_HOST”, “192.168.254.11” );
define( “WEB_ROOT”, “/fog/” );
define( “WOL_HOST”, “192.168.254.11” );
define( “WOL_PATH”, “/fog/wol/wol.php” );
define( “WOL_INTERFACE”, “eth0” );
define( “SNAPINDIR”, “/opt/fog/snapins/” );
define( “QUEUESIZE”, “10” );
define( “CHECKIN_TIMEOUT”, 600 );
define( “MYSQL_HOST”, “localhost” );
define( “MYSQL_DATABASE”, “fog” );
define( “MYSQL_USERNAME”, “XXXXXXXX” );
define( “MYSQL_PASSWORD”, “XXXXXXXXX” );
define( “DB_TYPE”, “mysql” );
define( “DB_HOST”, MYSQL_HOST );
define( “DB_NAME”, MYSQL_DATABASE );
define( “DB_USERNAME”, MYSQL_USERNAME );
define( “DB_PASSWORD”, MYSQL_PASSWORD );
define( “DB_PORT”, null );
define( “USER_MINPASSLENGTH”, 4 );
define( “USER_VALIDPASSCHARS”, “1234567890ABCDEFGHIJKLMNOPQRSTUVWZXYabcdefghijklmnopqrstuvwxyz_hB()^!” );
define( “NFS_ETH_MONITOR”, “eth0” );
define(“UDPCAST_INTERFACE”,“eth0”);
define(“UDPCAST_STARTINGPORT”, 63100 ); // Must be an even number! recommended between 49152 to 65535
define(“FOG_MULTICAST_MAX_SESSIONS”, 64 );
define( “FOG_JPGRAPH_VERSION”, “2.3” );
define( “FOG_REPORT_DIR”, “./reports/” );
define( “FOG_THEME”, “blackeye/blackeye.css” );
define( “FOG_UPLOADIGNOREPAGEHIBER”, “1” );
define( “FOG_VERSION”, “0.32” );
define( “FOG_SCHEMA”, 23 );
DEFINE(‘BASEPATH’, rtrim($_SERVER[‘DOCUMENT_ROOT’], ‘/’) . rtrim(WEB_ROOT, ‘/’));

is there any special requirements for the storage node root or tftp server root? ie any permissions other than fog:fog 775

Hi,
I’ve looked around the forum and tried all suggestions. This is fog_0.32 on a centos 6.2_x64.
Everything appears ok. However the front page says “unable to connect to XXXX Storage Node” under disk management.
I’ve changed:

1. the password for the linux user fog
2. checked to make sure its the same in /var/www/html/fog/commons/config.php
3. checked to make sure the TFTP password is the same under other information > fog settings

I’ve restarted the services, ensure that iptables are off and selinux is disabled although I do have both configured for fog.
I’ve checked that I can log in with putty to the tftp server and with filezilla for the ftp server and all appears OK. There are no errors in the logs and I still can’t connect. Im running out of ideas and was wondering if anybody has managed to get fog_0.32 up and running under Redhat 6.2, Centos 6.2 or Scientific Linux 6.2

Cheers,
Louis