Posts made by Lanius

@george1421

Thanks!!! This update has solved my problem. Thanks again!!!

@george1421

Thanks! How can I get this update. I believe the last builds were also realtek. Worth a go for sure.

Hi Yes We are on 5.10.71 which resolved some other hardware issues in the past.

Hi Guys,

I have been using FOG successfully for many months now and is now part of our production environment. We have imaged many different Lenovo laptops without issue. T470, T490, T14sGen1.
Well we got 2 new T14s Gen 2 and out of the box we have issues with loading the image and hoping if maybe with some help we can figure out why,

When one of our staff loaded T14sGen2 on the first laptop was painfully slow, I disabled everything I could think of in the bios under security thinking that might be a cause but still no change. still sat there for days at 56% this image is like 50GB. Now it doesnt even work gets stuck at restoring partition tables.

So I get the second one out. I was able to capture np. took less then 10 minutes. As soon as I go to load an image it goes to a crawl again. Used to take less then 10 minutes but this model just not cooperating. again painfully slow. writing in kb currently writing at 45mb/min. I have this issue on 2 different networks with 2 different fog servers. I put a call into Lenovo , dont know if that will bear any fruit though. Any thoughts or idea would be greatly appreciated.

Thanks!

@george1421 Thank you for the assistance you have provided in this. , I can’t thank you guys enough for your support and hard work you guys do for the community.

@sebastian-roth
Thank you! Not sure how that happens but I am happy to say that the T14s is now booting and have successfully captured an image!!!, I can’t thank you guys enough for your support and hard work you guys do for the community.

@sebastian-roth

grep DocumentRoot /etc/apache2/sites-available/001-fog.conf

DocumentRoot /var/www/html/

grep docroot /opt/fog/.fogsettings

docroot=‘/var/www/html/’

@george1421 I’ll be going in tomorrow so I will be able to run tests from client. Sorry for the wait

@sebastian-roth
Here is the output
ls -al /var/www/
total 20
drwxr-xr-x 4 root root 4096 Sep 14 04:10 .
drwxr-xr-x 14 root root 4096 Sep 14 04:07 …
drwxr-xr-x 11 www-data www-data 4096 Sep 14 04:10 fog
drwxr-xr-x 3 root root 4096 Sep 15 06:51 html
-rw-r–r-- 1 www-data www-data 52 Sep 14 04:10 index.php

ls -al /var/www/html
total 28
drwxr-xr-x 3 root root 4096 Sep 15 06:51 .
drwxr-xr-x 4 root root 4096 Sep 14 04:10 …
drwxr-xr-x 10 www-data www-data 4096 Sep 15 06:52 fog
-rw-r–r-- 1 root root 10918 Sep 14 04:07 index.html
-rw-r–r-- 1 www-data www-data 52 Sep 15 06:51 index.php

file /var/www/fog/service/ipxe/bzImage*
/var/www/fog/service/ipxe/bzImage: Linux kernel x86 boot executable bzImage, version 5.10.50 (buildkite-agent@Tollana) #1 SMP Sat Jul 17 07:06:37 CDT 2021, RO-rootFS, swap_dev 0x8, Normal VGA
/var/www/fog/service/ipxe/bzImage32: Linux kernel x86 boot executable bzImage, version 5.10.50 (buildkite-agent@Tollana) #1 SMP Sat Jul 17 07:10:37 CDT 2021, RO-rootFS, swap_dev 0x8, Normal VGA

file /var/www/html/fog/service/ipxe/bzImage*
/var/www/html/fog/service/ipxe/bzImage: Linux kernel x86 boot executable bzImage, version 4.19.145 (sebastian@Tollana) #1 SMP Sun Sep 13 05:35:01 CDT 2020, RO-rootFS, swap_dev 0x8, Normal VGA
/var/www/html/fog/service/ipxe/bzImage32: Linux kernel x86 boot executable bzImage, version 4.19.145 (sebastian@Tollana) #1 SMP Sun Sep 13 05:43:10 CDT 2020, RO-rootFS, swap_dev 0x7, Normal VGA

@george1421 It appears its the same hardware Id for both.

Intel Ethernet Connection (10) l219-V

PCI\VEN_8086&DEV_0D4F&SUBSYS_22AF17AA&REV_00
PCI\VEN_8086&DEV_0D4F&SUBSYS_22AF17AA
PCI\VEN_8086&DEV_0D4F&CC_020000
PCI\VEN_8086&DEV_0D4F&CC_0200

Thanks again.

Hi, Thanks for your response. I have installed the 5.10.50 x32 x64 and arm64 , rebooted client machine and presented with the same error. I have tried with the Ethernet Extension Adapter Gen2 as well as the Thinkpad Ultra docking station. Is there something else I can do? Thanks!

Hi guys,

first, im new to fog, and thank you for all you guys do!!. I have learned alot from this. Well finally I was able to get everything working and efi finally booting yay then I finally got the beloved boot screen only to find on this new Lenovo T14s after booting from any menu selection ie register inventory to start. I get the error. No network interfaces found. your kernel is most likely missing the correct driver. I am on the latest fog version 1.5.9.

Thanks