Posts made by kverkiss

@kverkiss said in Communication ERROR: operation timed out, could not authenticate, obj error:

@Jbob Thanks for the information!

The problem has been resolved. Thanks for all help.

@Jbob Thanks for the information!

@Tom-Elliott Hi Tom,
I just did a rollback over VMware to our server backup from last night. It is working fine now. Now I have updated the the most recent revison and no errors show up. I am currently monitoring if the problem reappears.

@Tom-Elliott I could do a rollback to an older version. I did update the certificate because this server had an IP change.

@Tom-Elliott Rev 7252:

 21-4-2016 17:13 Client-Info Version: 0.9.12
 21-4-2016 17:13 Middleware::Communication URL: http://10.10.2.250/fog/management/other/ssl/srvpublic.crt
 21-4-2016 17:13 Data::RSA FOG Server CA cert found
 21-4-2016 17:13 Data::RSA ERROR: Certificate validation failed
 21-4-2016 17:13 Data::RSA ERROR: Trust chain did not complete to the known authority anchor. Errors: Kan de handtekening van het certificaat niet controleren. (NotSignatureValid)
 21-4-2016 17:13 Middleware::Authentication ERROR: Could not authenticate
 21-4-2016 17:13 Middleware::Authentication ERROR: Certificate is not from FOG CA
 21-4-2016 17:13 Service Sleeping for 120 seconds
 21-4-2016 17:14 Bus Registering ParseBus in channel Power
 21-4-2016 17:14 Bus Became bus client
 21-4-2016 17:14 Bus Registering OnNotification in channel Notification
 21-4-2016 17:14 Bus Registering OnUpdate in channel Update

@Tom-Elliott Different errors this time:

 21-4-2016 17:04 Client-Info Version: 0.9.12
 21-4-2016 17:04 Middleware::Communication URL: http://10.10.2.250/fog/management/other/ssl/srvpublic.crt
 21-4-2016 17:04 Data::RSA FOG Server CA cert found
 21-4-2016 17:04 Data::RSA ERROR: Certificate validation failed
 21-4-2016 17:04 Data::RSA ERROR: Trust chain did not complete to the known authority anchor. Errors: Kan de handtekening van het certificaat niet controleren. (NotSignatureValid)
 21-4-2016 17:04 Middleware::Authentication ERROR: Could not authenticate
 21-4-2016 17:04 Middleware::Authentication ERROR: Certificate is not from FOG CA
 21-4-2016 17:04 Service Sleeping for 120 seconds
 21-4-2016 17:05 Bus Registering ParseBus in channel Power
 21-4-2016 17:05 Bus Became bus client
 21-4-2016 17:05 Bus Registering OnNotification in channel Notification
 21-4-2016 17:05 Bus Registering OnUpdate in channel Update```

@kverkiss said in Communication ERROR: operation timed out, could not authenticate, obj error:

@Tom-Elliott Hi Tom, I do have revision 7248.

The only difference I have, for this revision there is not token.dat created in c:\windows\system32\

@Tom-Elliott Hi Tom, I do have revision 7248.

@Tom-Elliott Besides I did all your provided steps as well, clearing the security token data.

@Tom-Elliott I have the exact same problem, started recently. I have also upgraded the fog server to a newer revision.

21-4-2016 16:24 Client-Info Version: 0.9.12
21-4-2016 16:24 Middleware::Communication URL: http://10.10.2.250/fog/management/other/ssl/srvpublic.crt
21-4-2016 16:24 Data::RSA FOG Server CA cert found
21-4-2016 16:24 Middleware::Authentication Cert OK
21-4-2016 16:24 Middleware::Communication POST URL: http://10.10.2.250/fog/management/index.php?sub=authorize
21-4-2016 16:24 Middleware::Communication ERROR: Failed to POST data
21-4-2016 16:24 Middleware::Communication ERROR: De externe server heeft een fout geretourneerd: (417) Expectation Failed.
21-4-2016 16:24 Middleware::Authentication ERROR: Could not authenticate
21-4-2016 16:24 Middleware::Authentication ERROR: Object reference not set to an instance of an object.
21-4-2016 16:24 Service Sleeping for 120 seconds

@Tom-Elliott Hi Tom, this problem is resolved now.

Thanks.

@Wayne-Workman

Wayne, I just did a SVN checkout and I’m getting the message below:

Checked out revision 4830.

I only see a difference for about +300 revisons, where can I get the revison like you desribed (2000+ revisions ahead)

I did: vn co https://svn.code.sf.net/p/freeghost/code/trunk %path

@Wayne-Workman Hi Wayne,

I did turn off the machine and disconnect all cables in many occasions, this will not resolve the problem.
For me the switches are configured the same too, and I’m using the same type/model of switches. The problem is not switch related for sure.

@Wayne-Workman I have the exact same problem in a callcenter. The problem seems to occur from a cold start but resolves itself when booting to Windows first. This is impacting all images here.

Sttange this is; When I connect the workstation directly into the switchport in the patch cabinet/rack cabinet, the issue doesn’t seem to occur. It only happens when I connect the workstation to a floorport which contains a cable distance of about 25-30 meters.

I think electric or magnetic field causes this problem.

Once I boot-up the workstation into Windows, the issue is resolved, but can return at random timeframes.

Hello,

I do have a problem with registering hosts when entering the product keys for a Windows systeem.
The database query is written afer the full registration, however the product key information in the webgui is empty:

When checking the database, I see the following information:

I am not able to update the new product key in the webgui page for any host. Information is not updated.

Besides, newly added hosts with a product key assigned cannot be activated automatically using the new fog client. I have to do the activation manually every time.

I am using fogserver 1.2, revision 4577.

Who is able to assist me?

Thanks in advance.

Ken

@ch3i Version: 4577

Hi all,

It seems I cannot read the entered product key from the admin panel, the value seems empty.

However in phpmyadmin I am able to read the encrypted product key:

There are no MySQL problems showing up.

Who is able to assist me with this problem?

Thanks in advance.

Ken

@Wayne-Workman I have set a DHCP reservation for this laptop in W2K8 server. I am able to define a bootfile for this specific laptop, in this case to boot realtek.kkpxe. This should solve the problem for the laptop not able to boot over pxe.

@cml Hi cml, thnx for the answer. At this moment I’ve changed the DHCP server settings to boot realtek.kkpxe instead of undionly.kkpxe. This solved the problem for this Lenovo laptop but now any other machine cannot boot any longer.

I have to create an image first before I can continue testing your debug files.

Thanks for your help!

For the record, I am using a Windows 2008 R2 server to provide the IP adres and the bootfile. Dnsmasq is not involved at all.