Posts made by Kureebow

@Kureebow Kernel Update resolved the issue. Thank you JJ Fullmer for the assistance!

@JJ-Fullmer They are UFS devices. Would you recommend updating to the dev branch or trying the kernel first? Which Kernel version should I be looking for?

@Tom-Elliott It appears to be “released” around 2020. UFS (Universal flash storage).

I have yet to do any “Custom” work within fog usually everything plays pretty well.

I am willing to try if you can point me in the correct directions.

@luilly23 I cant seem to find anything in the fog wiki for UFS being unsupported.

@luilly23 It is UFS storage. Time to look to see if its supported.

I am sure I am missing something incredibly simple but I cannot figure this out.

I am attempting to capture an image from a dell Latitude 3140 but I get the error cannot find disk on system (get harddisk). Usually in the past this issue was resolved by switching to an AHCI format.

However, upon examination of bios the only option listed is all integrated storage disable of AHCI/NVMe.

Just stumped on this one.

Currently running version 1.5.10.

Anybody have an ideas?

Not sure if this is FOG side or not so hoping someone can lend me a hand. I am attempting to deploy and image on a Dell 3520. It appears as the image is deploying to the machine but it is all happening behind a black message saying the following:

SBC000:00: ucsi_handle_connector_change: CONNECTOR_STATUS failed (-110)

One the image deployment screen goes away I go into dells test screens and direct boot to HD through boot selection changes nothing.

@Sebastian-Roth We are up and going again. Thank you so much for your help I really appreciate it.

@Sebastian-Roth Perfect! We are working now. Now it is asking me to update database from ipaddress/fog/management Where do I go to do this or do I just press enter and move forward?

@Sebastian-Roth Didn’t get a return from that command but no error. I assume it worked.

root@localhost ~]# systemctl start mariadb.service
[root@localhost ~]#

@Sebastian-Roth
root@localhost ~]# ls -al /var/lib/mysql/
total 28716
drwxr-xr-x. 5 mysql mysql 194 Mar 28 10:57 .
drwxr-xr-x. 61 root root 4096 Jun 3 2022 …
-rw-rw----. 1 mysql mysql 16384 Mar 28 10:57 aria_log.00000001
-rw-rw----. 1 mysql mysql 52 Mar 28 10:57 aria_log_control
drwx------. 2 mysql mysql 8192 Jun 3 2022 fog
-rw-rw----. 1 mysql mysql 18874368 Mar 28 10:57 ibdata1
-rw-rw----. 1 mysql mysql 5242880 Mar 28 10:57 ib_logfile0
-rw-rw----. 1 mysql mysql 5242880 Jun 3 2022 ib_logfile1
drwx------. 2 mysql mysql 4096 Jun 3 2022 mysql
drwx------. 2 mysql mysql 4096 Jun 3 2022 performance_schema
[root@localhost ~]#

root@localhost ~]# ls -al /var/log/mysql*
ls: cannot access /var/log/mysql*: No such file or directory
[root@localhost ~]#

root@localhost ~]# ps ax | grep -i -e mysql -e maria
13627 pts/1 S+ 0:00 grep --color=auto -i -e mysql -e maria
[root@localhost ~]#

@Sebastian-Roth No such file or directory

@Sebastian-Roth
Filesystem Size Used Avail Use% Mounted on
devtmpfs 48G 0 48G 0% /dev
tmpfs 48G 0 48G 0% /dev/shm
tmpfs 48G 19M 48G 1% /run
tmpfs 48G 0 48G 0% /sys/fs/cgroup
/dev/mapper/centos-root 3.0T 491G 2.5T 17% /
/dev/sda2 1014M 239M 776M 24% /boot
/dev/mapper/centos-home 3.7T 579M 3.7T 1% /home
tmpfs 9.5G 100K 9.5G 1% /run/user/1000

mariadb.service - MariaDB database server
Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2023-03-28 10:57:12 EDT; 16min ago
Process: 12321 ExecStartPre=/usr/libexec/mariadb-prepare-db-dir %n (code=exited, status=1/FAILURE)
Main PID: 1989

Mar 28 10:57:11 localhost.localdomain systemd[1]: Starting MariaDB database s…
Mar 28 10:57:11 localhost.localdomain mariadb-prepare-db-dir[12321]: Socket f…
Mar 28 10:57:11 localhost.localdomain mariadb-prepare-db-dir[12321]: Is anoth…
Mar 28 10:57:11 localhost.localdomain systemd[1]: mariadb.service: control pr…
Mar 28 10:57:12 localhost.localdomain systemd[1]: Failed to start MariaDB dat…
Mar 28 10:57:12 localhost.localdomain systemd[1]: Unit mariadb.service entere…
Mar 28 10:57:12 localhost.localdomain systemd[1]: mariadb.service failed.
Hint: Some lines were ellipsized, use -l to show in full.

The second command returned the following

tail: cannot open ‘/var/log/mysql/log’ for reading: No such file

@Sebastian-Roth I may know the issue. I completely looked over your comment about making sure there were no tasks. I have copied the error logs for your confirmation. If that is the case I apologize moving too fast this morning.

fog_error_1.5.10.log

@Sebastian-Roth Please see failure listed. Getting the error log now

• Setting up fogproject user…Skipped
• Locking fogproject as a system account…OK
• Setting up fogproject password…OK
• Stopping FOGMulticastManager.service Service…OK
• Stopping FOGImageReplicator.service Service…OK
• Stopping FOGSnapinReplicator.service Service…OK
• Stopping FOGScheduler.service Service…OK
• Stopping FOGPingHosts.service Service…OK
• Stopping FOGSnapinHash.service Service…OK
• Stopping FOGImageSize.service Service…OK
• Setting up and starting MySQL…Failed!

!!!
!! The installer was not able to run all the way to the end as !!
!! something has caused it to fail. The following few lines are !!
!! from the error log file which might help us figure out what’s !!
!! wrong. Please add this information when reporting an error. !!
!! As well you might want to take a look at the full error log !!
!! in /root/fogproject/bin/error_logs/fog_error_1.5.10.log !!
!!!

chsh: Shell not changed.
Changing shell for fogproject.
New password: Retype new password: Changing password for user fogproject.
passwd: all authentication tokens updated successfully.
Job for mariadb.service failed because the control process exited with error code. See “systemctl status mariadb.service” and “journalctl -xe” for details.
[root@localhost bin]#

@Sebastian-Roth
[root@localhost ~]# ls -al /home/admin/fogproject-1.5.9
total 60
drwxrwxr-x. 10 admin admin 255 Jun 3 2022 .
drwx------. 19 admin admin 4096 Mar 27 12:48 …
-rw-rw-r–. 1 admin admin 51 Sep 13 2020 authors.txt
drwxrwxr-x. 3 admin admin 57 Jun 3 2022 bin
-rw-rw-r–. 1 admin admin 45 Sep 13 2020 .gitattributes
-rw-rw-r–. 1 admin admin 908 Sep 13 2020 .gitignore
drwxrwxr-x. 6 admin admin 80 Sep 13 2020 lib
-rw-rw-r–. 1 admin admin 35141 Sep 13 2020 LICENSE
drwxrwxr-x. 8 admin admin 167 Sep 13 2020 packages
-rw-rw-r–. 1 admin admin 2963 Sep 13 2020 README.md
drwxr-xr-x. 2 root root 6 Jun 3 2022 rpttmp
drwxrwxr-x. 2 admin admin 64 Sep 13 2020 SELinux
drwxrwxr-x. 3 admin admin 26 Sep 13 2020 src
drwxr-xr-x. 2 root root 4096 Jun 3 2022 tmp
drwxrwxr-x. 5 admin admin 72 Sep 13 2020 utils
[root@localhost ~]#

@Kureebow From the GUI I can see a folder following the file path /home/admin/fogproject-1.5.9 if this is of any value.

The command you listed returned “No such file or directory”

@Sebastian-Roth I did get a “No file or directory” return from the first command.

@Sebastian-Roth So I am alittle bit confused as I know fog is installed on this server as we have used it to image for about 2 years now. If I follow your second string of commands what issues will I encounter with what is working now? Just so I can let my supervisors know what is happening.

Thanks

Here are the results for ls - al

[root@localhost fogproject]# ls -al
total 16
drwx------. 4 fogproject fogproject 146 Jun 3 2022 .
drwxr-xr-x. 4 root root 37 Jun 3 2022 …
-rw-r–r–. 1 fogproject fogproject 18 Mar 31 2020 .bash_logout
-rw-r–r–. 1 fogproject fogproject 193 Mar 31 2020 .bash_profile
-rw-r–r–. 1 fogproject fogproject 604 Jun 3 2022 .bashrc
drwxr-xr-x. 3 fogproject fogproject 31 Jun 3 2022 .config
drwxr-xr-x. 4 fogproject fogproject 51 Jun 3 2022 .mozilla
-rwxr-xr-x. 1 fogproject fogproject 681 Jun 3 2022 warnfogaccount.sh
[root@localhost fogproject]#

These are the results for pwd

[root@localhost fogproject]# pwd
/home/fogproject