It is working now so with Bios set to Auto (legacy First) and the exit mode set to GRUB_FIRST_HDD it boots!!! I tried it with UEFI and it didn’t work which is why I went to auto.
Thanks for the help I appreciate it!
It is working now so with Bios set to Auto (legacy First) and the exit mode set to GRUB_FIRST_HDD it boots!!! I tried it with UEFI and it didn’t work which is why I went to auto.
Thanks for the help I appreciate it!
@Sebastian-Roth The Lenovo is a think Center M710s and it is running auto (legacy first)
@Sebastian-Roth I did a deploy the problem is when the deploy is over this is what I get it never boots to the hard drive with the image on it. It just keeps looping after the image is deployed.
I tried it on a VM image and I get the same error.
This is the first time I am loading it on the machine I created it from a VM not from the Lenovo. I can try and load it to another VM and see what happens. I did run the comparability test and it ran just fine.
I am running Fog 1.5.8 on Debian 9 its a fresh install with fog as my DHCP server I was able to upload a Windows 10 image but when I try and deploy it on a Lenovo desktop I get the following error “chainloading failed hit “s” for the ipxe shell”. and it restarts and goes into a loop, anyone have any ideas?