I’ve just forgot this:
pxelinux.cfg\default

DEFAULT vesamenu.c32
Label fog
MENU DEFAULT
kernel ipxe.krn dhcp && chain [url]http://192.168.1.26/fog/service/ipxe/boot.php:mac=${net0/mac}[/url]
PROMPT 0
TIMEOUT 01

Hi

It look like, I found a solution.
so.
ubuntu 13.10
fog 1.0.1
Installed with the built in dhcp server
After I disabled…
After Install the dnsmasq
Configured as the fog wiki wrote it.
and I am not sure(I did to many things) but probably these two lane:
enable-tftp
dhcp-range=192.168.1.0,proxy,255.255.255.0

But anyway I attach the complete configuration file

Thank you for your help

Krisz

[url=“/_imported_xf_attachments/0/826_ltsp.conf-working.txt?:”]ltsp.conf-working.txt[/url]

I followed this [URL=“http://fogproject.org/forum/threads/dnsmasq-help-for-ipxe-stuff.10222/#post-24442”]DNSMasq Help for iPXE stuff[/URL]

but now, it can’t find the boot.php
[url]http://192.168.1.17/fog/service/ipxe/boot.php[/url]

Good morning

I am here again

So I re installed everything again, ubuntu 13.10 fog 1.0.1
First with dhcp: it was working
Second step: I removed the isc-dhcp-server: it was not booting at all
third step : I installed the dnsmasq, and I configed as it was on the fog wiki : it start booting, but connection time out again at the default.ipxe

so it has to be the dnsmasq

[CODE]sudo ./installfog.sh[/CODE]

I’ve got an error message:
setting up and starting vsftp server … failed!
what does it mean?

Thank you

I will start again, but now, with fog 0.32 with built in dhcp, if it is working, I will disable it, and install the proxydhcp… and I come back tomorrow

Thank you for your patience

Krisz

If I install a fog with the built in dhcp, how can i disable the dhcp after the installation?

I think that was a step back, I attached the result [ATTACH]816[/ATTACH]

[url=“/_imported_xf_attachments/0/816_005.png?:”]005.png[/url]

Why it is trying to use the tftp setting from 0.27
I think I was not clear.

I have downloaded a vm 0.27
this one is working fine with the built in dhcp

second virtal machine: ubuntu 14+fog 1.0.1 +proxy dhcp with the settings from the fog wiki
I did not set anything on the tftp, I’ve just modified the proxydhcp…
And there is default.ipxe in the tftpboot folder