The SVN Version 2272. But i belive i fixed it. i used the default bzImage and unicast create/deploy image is working. only multicast is not working but i thinks its better to discuss this in the other thread

No sorry i had no luck. multicast still not working. unicast for create/deploy an image are working. he still hangs at the same point at the partclone screen. I also tried debug mode - everything looks fine, no errors on screen until this point.

I´m sorry to reopen this old thread but i have a bunch this laptops compaq 6910p. I can upload an image without problems but deploying an image fails with a kernel panic.

Maybe someone can give me the FOG ID of the kernel from the “Kernel Update” menu i need. i´m already tried a few kernels with no luck.

Hi,

i made a complete fresh installation with Ubuntu Server 12.04.5 (and also Debian 7.5) and the lastest FOG SVN 2270 (yesterday) with in a NAT VM. I can´t do a multicast deploy of an image. I created a group and assigned one single client (NAT VM too) to this group. its not working (multicast deploy with a group to a single client also not working) . It´s starts up until it cames to the partclone screen. After this it hangs and nothing happens. With Unicast everything works fine and i can create and deploy an image.

In the LOG-Viewer i found serveral entrys about

[CODE][09-10-14 7:18:25 am] | Task (1) mcgroup-with-one-client is already running PID 3999
[09-10-14 7:18:35 am] | Task (1) mcgroup-with-one-client is already running PID 3999
[09-10-14 7:18:45 am] | Task (1) mcgroup-with-one-client is already [/CODE]

I´m also noticed that the time is incorrect. I tried to correct it with the hints i found in the forum but it shows still the wrong time. I´am also tried to apply the patches i found here in the thread but it looks like they are already there.

With the new SVN i found the Option Multicast-Image under “Image-Management”. When i create with this an multicast session, start the clients over pxe and select “Join Multicast Session” the multicast restore working. This is really confusing that it is working this way but not the way through the group management.

Here the install Log:

[CODE]Script started on Di 09 Sep 2014 13:58:57 CEST
Debian

  ..#######:.    ..,#,..    .::##::. 

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.3.0 Installer/Updater

• Found FOG Settings from previous install at: /opt/fog/.fogsettings
• Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at http://www.fogproject.org/wiki

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Debian
Installation Type: Normal Server
Server IP Address: 192.168.83.134
DHCP router Address: 192.168.83.2
DHCP DNS Address: 192.168.83.2
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0
Image Storage Location: /images
Donate: 0

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

• Preparing apt-get

• Installing package: apache2

• Installing package: php5

• Installing package: php5-json

• Installing package: php5-gd

• Installing package: php5-cli

• Installing package: php5-mysql

• Installing package: php5-curl

• Installing package: mysql-server

  We are about to install MySQL Server on
  this server, if MySQL isn’t installed already
  you will be prompted for a root password.

  Press enter to acknowledge this message.

Paketlisten werden gelesen…
Abhängigkeitsbaum wird aufgebaut…
Statusinformationen werden eingelesen…
mysql-server ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

• Installing package: mysql-client
• Installing package: isc-dhcp-server
• Installing package: tftpd-hpa
• Installing package: tftp-hpa
• Installing package: nfs-kernel-server
• Installing package: vsftpd
• Installing package: net-tools
• Installing package: wget
• Installing package: xinetd
• Installing package: sysv-rc-conf
• Installing package: tar
• Installing package: gzip
• Installing package: build-essential
• Installing package: cpp
• Installing package: gcc
• Installing package: g++
• Installing package: m4
• Installing package: htmldoc
• Installing package: lftp
• Installing package: openssh-server
• Installing package: php-gettext

Confirming package installation.

• Checking package: apache2…OK
• Checking package: php5…OK
• Checking package: php5-json…OK
• Checking package: php5-gd…OK
• Checking package: php5-cli…OK
• Checking package: php5-mysql…OK
• Checking package: php5-curl…OK
• Checking package: mysql-server…OK
• Checking package: mysql-client…OK
• Checking package: isc-dhcp-server…OK
• Checking package: tftpd-hpa…OK
• Checking package: tftp-hpa…OK
• Checking package: nfs-kernel-server…OK
• Checking package: vsftpd…OK
• Checking package: net-tools…OK
• Checking package: wget…OK
• Checking package: xinetd…OK
• Checking package: sysv-rc-conf…OK
• Checking package: tar…OK
• Checking package: gzip…OK
• Checking package: build-essential…OK
• Checking package: cpp…OK
• Checking package: gcc…OK
• Checking package: g++…OK
• Checking package: m4…OK
• Checking package: htmldoc…OK
• Checking package: lftp…OK
• Checking package: openssh-server…OK
• Checking package: php-gettext…OK

Configuring services.

• Setting up and starting MySql…OK

• Backing up user reports…OK

• Setting up and starting Apache Web Server…OK
  You still need to install/update your database schema.
  This can be done by opening a web browser and going to:

  http://192.168.83.134/fog/management

Press [Enter] key when database is updated/installed.

• Configuring Fresh Clam…OK
• Setting up storage…OK
• Setting up and starting NFS Server…OK
• Setting up and starting DHCP Server…OK
• Setting up and starting TFTP and PXE Servers…OK
• Setting up and starting VSFTP Server…OK
• Setting up sudo settings…OK
• Setting up FOG Snapins…OK
• Setting up and building UDPCast…OK
• Installing init scripts…OK
• Setting up FOG Services…OK
• Starting FOG Multicast Management Server…OK
• Starting FOG Image Replicator Server…OK
• Starting FOG Task Scheduler Server…OK
• Setting up FOG Utils…OK

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  http://192.168.83.134/fog/management

  Default User:
        Username: fog
        Password: password

Script done on Di 09 Sep 2014 13:59:59 CEST
[/CODE]

I hope you can help me