Update 2:

I went through the Wiki page you sent and checked all of the settings.
Nice page and a lot of good things to check.

Sadly - in my case, no luck.

But I will admit the project has very good documentation.

Thanks.

Kevin

Thanks.
Now I understand a lot more.

What I need to do now is upload a copy of a current (running) system image into the Fog Server.
Fog is more of a replication system than an first boot system.

The reason I started with Fog was that the X-4500 I have will only do a network boot (the hard coded limitation within the system BIOS) does not allow the use of CD/DVD drives to boot the system. Has to do with system security.

That said, I do have a stand alone host (DL-360/G5) that is running OLE 6.6 on it. I can try to upload it to the Fog system.

I also have a non .iso file on the /images directory that is a conventional boot disk for OLE6.6 (has a lot of files in it). That also is not bootable.

Thank you again for all your help!!!

Kevin

Yes. There are two images.
An Oracle Linux 6.6 version and an Oracle Linux 7.1 version.
One is about 3.8 GB and the other is about 4.2 GB.
These were .iso files that were downloaded this week from Oracle.
The 6.6 was tested directly on another host without problems.
It installed well using a CD drive in the host.

Thanks again for responding.

Kevin

Update 2:

I went through the Wiki page you sent and checked all of the settings.
Nice page and a lot of good things to check.

Sadly - in my case, no luck.

But I will admit the project has very good documentation.

Thanks.

Kevin

Hi:

Thank you for a quick reply. I did change the permissions as you suggested.
I then used a ftp client to look at the permissions assuming the Fog application uses FTP to check file sizes.

[root@x61 images]# ftp localhost
Trying ::1…
ftp: connect to address ::1Connection refused
Trying 127.0.0.1…
Connected to localhost (127.0.0.1).
220 (vsFTPd 2.2.2)
Name (localhost:root): fog
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> cd /images
250 Directory successfully changed.
ftp> ls
227 Entering Passive Mode (127,0,0,1,242,170).
150 Here comes the directory listing.
drwxrwxrwx 12 501 501 4096 Jun 04 13:28 OLE6.6
-rwxrwxrwx 2 501 501 3853516800 Nov 06 2014 OLE6.6.iso
-rwxrwxrwx 1 501 501 4293918720 Jun 02 22:03 OracleLinux7.1.iso
drwxrwxrwx 3 501 501 4096 Jun 04 18:48 dev
drwxrwxrwx 2 501 501 4096 May 31 13:52 postdownloadscripts
226 Directory send OK.

So the permissions are set to 0777 as you suggested. It measures the file sizes as expected. However the Fog application is still reporting the file size as “0”. It sees the file names but not the size of the file. In addition, the guest host sees the name but reports it as “0” in size.

Bit weird.

Kevin

Hi:

I am running Fog 1.2 on a Linux laptop and have put two images in the /images directory.
The permissions are set to fog:fog
The images are Oracle Linux 6.6 and 7.1

If I look at the directory, I see the image files:

[root@x61 images]# ls -la
total 7956508
drwxr-xr-x. 5 fog fog 4096 Jun 4 09:24 .
dr-xr-xr-x. 29 root root 4096 Jun 4 06:17 …
drwxr-xr-x. 3 fog fog 4096 Jun 4 10:56 dev
-rwxr-xr-x. 1 fog fog 0 May 31 06:52 .mntcheck
drwxr-xr-x 12 fog fog 4096 Jun 4 06:28 OLE6.6
-rwxr-xr-x 2 fog fog 3853516800 Nov 6 2014 OLE6.6.iso
-rwxr-xr-x. 1 fog fog 4293918720 Jun 2 15:03 OracleLinux7.1.iso
drwxr-xr-x. 2 fog fog 4096 May 31 06:52 postdownloadscripts

However, if I look on the web GUI, under the “Image Management - List all images”, the files names are reported however the reported file size is O bytes.

OLE6.6.iso
default:Linux
Multiple Partition Image - Single Disk (Not Resizable) 0.00 iB 0.00 iB No Data
Oracle 7.1
default:Linux
Multiple Partition Image - Single Disk (Not Resizable) 0.00 iB 0.00 iB No Data

In addition, if I go to the guest host and look at the attached monitor, it goes through the boot process and then stops saying the download file is 0 bytes. It does see the right file name however. It waits a minute and then reboots and starts again to try to download the right image.

Just in case it is needed, the guest host for this project is a Oracle (Sun) SunFire X-4500 (2x2 CPU and 48 SATA drives - sort of an unusual host).

Have played with a number of settings with no luck as well as a few fresh installs of Fog to make sure all the initial settings are right. At this point, I am thinking it may be a small bug or misconfiguration that I did.

My working assumption is that the FTP process used to access the image files is not looking at the right place or that the FTP module is not reading file sizes. However — if I use Firefox to look at the image directory, all is well.

Index of ftp://x.x.x.195/../../images/

Up to higher level directory
Name Size Last Modified
OLE6.6
6/4/2015 1:28:00 PM
File:OLE6.6.iso
3763200 KB 11/6/2014 12:00:00 AM
File:OracleLinux7.1.iso
4193280 KB 6/2/2015 10:03:00 PM
dev
6/4/2015 6:15:00 PM
postdownloadscripts
5/31/2015 1:52:00 PM

Any help would be very helpful.

Thanks.