@george1421 GEORGE THANK YOU SO MUCH!!! YOU HELPED SO MUCH

@george1421 GEORGE THANK YOU SO MUCH!!! YOU HELPED SO MUCH

@george1421 I checked that conf file and made some adjustments.
Now the moment of truth. this is current status.

kevin@ET1WS3239A:~$ ps aux|grep dhcp
dhcpd 1102 0.0 0.1 35484 13260 ? Ss 22:12 0:00 dhcpd -user dhcpd -group dhcpd -f -4 -pf /run/dhcp-server/dhcpd.pid -cf /etc/dhcp/dhcpd.conf
kevin 4292 0.0 0.0 14228 928 pts/0 S+ 22:46 0:00 grep --color=auto dhcp

systemctl status isc-dhcp-server
● isc-dhcp-server.service - ISC DHCP IPv4 server
Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2017-12-26 22:12:02 CST; 37min ago
Docs: man:dhcpd(8)
Main PID: 1102 (dhcpd)
CGroup: /system.slice/isc-dhcp-server.service
└─1102 dhcpd -user dhcpd -group dhcpd -f -4 -pf /run/dhcp-server/dhcpd.pid -cf /etc/dhcp/dhcpd.con

Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Wrote 0 class decls to leases file.
Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Wrote 0 leases to leases file.
Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Listening on LPF/eno1/b8:ca:3a:8e:15:14/192.168.1.0/24
Dec 26 22:12:03 ET1WS3239A sh[1102]: Listening on LPF/eno1/b8:ca:3a:8e:15:14/192.168.1.0/24
Dec 26 22:12:03 ET1WS3239A sh[1102]: Sending on LPF/eno1/b8:ca:3a:8e:15:14/192.168.1.0/24
Dec 26 22:12:03 ET1WS3239A sh[1102]: Sending on Socket/fallback/fallback-net
Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Sending on LPF/eno1/b8:ca:3a:8e:15:14/192.168.1.0/24
Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Sending on Socket/fallback/fallback-net
Dec 26 22:12:03 ET1WS3239A dhcpd[1102]: Server starting service.
Dec 26 22:49:23 ET1WS3239A systemd[1]: Started ISC DHCP IPv4 server.

@george1421 After checking the status I think this confirmed that what I thought that DHCP just wasn’t operational.

isc-dhcp-server.service - ISC DHCP IPv4 server
Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2017-12-26 22:02:30 CST; 7s ago
Docs: man:dhcpd(8)
Process: 5095 ExecStart=/bin/sh -ec CONFIG_FILE=/etc/dhcp/dhcpd.conf; if [ -f /etc/ltsp/dhcpd.conf ]; then
Main PID: 5095 (code=exited, status=1/FAILURE)

Dec 26 22:02:30 ET1WS3239A sh[5095]: Not configured to listen on any interfaces!
Dec 26 22:02:30 ET1WS3239A sh[5095]: If you think you have received this message due to a bug rather
Dec 26 22:02:30 ET1WS3239A sh[5095]: than a configuration issue please read the section on submitting
Dec 26 22:02:30 ET1WS3239A sh[5095]: bugs on either our web page at www.isc.org or in the README file
Dec 26 22:02:30 ET1WS3239A sh[5095]: before submitting a bug. These pages explain the proper
Dec 26 22:02:30 ET1WS3239A sh[5095]: process and the information we find helpful for debugging…
Dec 26 22:02:30 ET1WS3239A sh[5095]: exiting.
Dec 26 22:02:30 ET1WS3239A systemd[1]: isc-dhcp-server.service: Main process exited, code=exited, status=1/FAILURE
Dec 26 22:02:30 ET1WS3239A systemd[1]: isc-dhcp-server.service: Unit entered failed state.
Dec 26 22:02:30 ET1WS3239A systemd[1]: isc-dhcp-server.service: Failed with result ‘exit-code’.

@george1421 During installation I choose the option to allow Fog to take care of DHCP, then after completing the install changed the /etc/network/interface file from dhcp to static and changed the address’s accordingly

https://drive.google.com/open?id=1685QBOnQZ51n-dMxmGr-jBkfdt-wPwpg

I am in the exact same situation cdutko was in at the point where it isn’t booting PXE. How did he go from the netstat verifying port pxe wasn’t bound to port 67 to working? I would appreciate any help.

Base Linux: Debian
Detected Linux Distribution: Ubuntu
Server IP Address: 192.168.1.1
Server Subnet Mask: 255.255.255.0
Interface: eno1
Installation Type: Normal Server
Internationalization: 0
Image Storage Location: /images
Using FOG DHCP: Yes
DHCP router Address: