@***Redbob in the file /tftpboot/default.ipxe
edit it with a text editor like nano or vi
Best posts made by Junkhacker
-
RE: Diference FOG Storage Node
-
RE: HOW to upgrade from trunk SVN 5850 to 1.4.0 stable?
@Wayne-Workman a couple minor corrections. the last official release to capture using partimage was 0.32, i think. images have always been gzip compressed. between 1.2 and 1.3 the program for decompressing was switched to pigz. pigz is a parallel (multi-threading) implementation of gzip compression, which sped it up a bit.
-
RE: Installed FOG, what now?
@bertalanimre first off, i think you may have a misunderstanding of what fog is. fog isn’t used for “installing” operating systems. it’s for deploying pre-configured images of systems. you install your system to a computer, configure it the way you want, then capture it with fog. then you can deploy that image to other systems.
with that out of the way, have you set your DHCP 66/67 options?
-
RE: Installed FOG, what now?
@bertalanimre that doesn’t look correct. options 66 and 67 aren’t just things you have to enable, they’re configured. dnsmasq calls these options next-server and filename, i believe.
try adding this line to your configdhcp-boot=undionly.kpxe,,<fog_server_IP>
-
RE: Touchscreen in PXE boot
@rwakc well, it would be technically possible to set up a method where you could be automatically imaging any device pxe booted from the network, and set up multiple dhcp scopes on different network ports, serving out different pxe boot files with embedded scripts. that way, you’d be able to choose what image the system gets imaged with by choosing what network you plug the device into.
-
RE: Trying out Fog for the very first time, already stuck at this tutorial....
@vascomorais fog configuration > ipxe general configuration > advanced menu settings
there should be a text box at the “Advanced menu command” line -
RE: New FOG install, now can't find old image files in FOG
@PITSKing fog pulls that information from the database, not the files. if you recreate the “profiles” for the images and point them to the existing files, they should work.
-
RE: PXE Client tries to find wrong file
@Beyondlimitation the version of dnsmasq you’re running is old. old versions only allowed .0 to be on the tail end of a file name
-
RE: Very slow cloning speed on specific model
@george1421 one option for eliminating the network card as the source of the problem (not completely, but mostly) is to boot with a usb adapter plugged in as well, both plugged into the network, and after ipxe loads unplug the network from the built in adapter.
-
RE: Getting Kernel Panics after upgrade to 1.5.9-RC2
@THEMCV You need to update a FOG Configuration->Fog Settings parameter->TFTP Server->KERNEL RAMDISK SIZE set it to 275000 from the original value of 127000
-
RE: Getting Kernel Panics after upgrade to 1.5.9-RC2
@THEMCV to be honest, i’m not sure. i haven’t been involved much between the new kernel size being experimental to it being in production. i just recognized the problem.