Posts made by JulianDudek

Hy

I hope my msg helped you thanks and regards.

Hy there i can see your post and i have some suggestion

Network Setup:

NIC1: Connect NIC1 to your primary network (e.g., LAN) that will serve the FOG Server to clients.
NIC2: Connect NIC2 to a separate network segment (e.g., a dedicated storage network) for imaging and storage purposes.
Install FOG Server:

Install FOG Server on your chosen server hardware. Follow the FOG Server installation instructions for your operating system (commonly Ubuntu or CentOS).
Configure NICs:

Assign static IP addresses to both NICs. Use different subnets for each NIC. For example:
NIC1: IP: 192.168.1.100, Subnet: 255.255.255.0 (LAN network)
NIC2: IP: 192.168.2.100, Subnet: 255.255.255.0 (Storage network)
Network Configuration:

Modify the network configuration files for both NICs to set the static IP addresses. On Ubuntu, the file is typically located at /etc/netplan/; on CentOS, it’s usually in /etc/sysconfig/network-scripts/.

Thanks and regards
JulianDudek