Re: EFI stub: loaded initrd from command line option

@Tom-Elliott Version: 5929

@Sebastian-Roth When I reboot the machine to it’s installed OS it runs on gigabit.

I could not reiterate the case where I have no ip address. On the other hand at boot (not as a debug task) I have this:

Here it is
I specify I re-run “ip a s” and there is no “no-carrier”

Here they are :

I repeat what Sebastian says “unoffical”, I mean “Kernel.TomElliott.5.6.18.64” . The hardware IDs is PCI\VEN_8086&DEV_15BE&CC_0200 built in. When I pick an option FOS Linux can’t get an adresse IP from DHCP and don’t know if FOS see the network adapter.

When I use the “unofficial” 5.6.18 kernel I can’t connect the machine Dell 5500/5300 in 100 MB or 1 GB.

When I test with the 5.6.18 it works at 1Gb.

It only works at 100 Mbits.

It is still necessary to update the file ?

It proceed to the end and finish the task.

No I don’t use an USB device.

But I have this message:

Yes it works with the 5.6.18 !

Sorry I saw you have just released the linux kernel image bzimage but I can’t connect to the pxe with this driver dev_8168&cc_0200, Realtek PCIe GbE Family Controller. Can you please add in it. Thank you.

Is fog 1.5.8/1.5.9 compatible with Ubuntu 14.04.4 LTS or the reverse ? Thanks.