@george1421 do you tink there is any chance of multicast working if I add a storage node to every subnet?

I set this in the pfsense igmp proxy:

And these setting in the fog setting tab:

The ip of the fog server is 10.1.0.35
And the ip of the pfsense in the server subnet is 10.1.0.254

10.1.2.254 and 10.1.3.254 are both subnets where the clients are located.

As soon as I change the multicast address in the fog setting to an ip it gives me “read image_hdr block_size error”.

Am I configuring something wrong?

I started testing this but now I get a different problem: I get “read image_hdr block_size error”. I looked it up and found this: https://forums.fogproject.org/topic/8743/can-not-deploy-using-multicast-read-image_hdr-block_size-error . I haven’t completely tried this but my firewall is on pass all to this network. Or do they mean software firewall?

I’ll test a bit more this evening.

Thanks for the help so far!

Server

• FOG Version: 1.3.4
• OS: Ubuntu 16.04 LTS

Description

When I connect 2 clients on the same ip segment multicasting works. But when the multicast passes the pfsense firewall (all trafic in both directions is allowed) the multicast stays at “starting to restore image”.