is my hardware set up correctly ? is my static ip configuration good?" thank you
Best posts made by jose Santana
Latest posts made by jose Santana
FOG HELP PLEASE HELP
I’m using a lenovo B590, i wipe the hard drive and install Linux 12.04. I’m using a laptop with Linux and a brand new 5 port switch[COLOR=#ff0000] IS THIS CORRECT[/COLOR]? everything is not connected to a network, the Linux SERVER laptop has a CAT5 wired to a switch and from the switch to another laptop that i will be uploading the image and installing the fog client on. [COLOR=#ff0000]is this CORRECT[/COLOR] ? I’m able to install fog using the video tutorial on fog project website. i set my static ip as follow , Ip Address 192.168.1.101 Net mask: 255.255.255.0 gateway 192.168.1.1 and under dns server : 192.168.1.1 and save wired connection [COLOR=#ff0000]is this CORRECT[/COLOR] ? my wireless would usually connect but i remove this connection from the wireless network configuration. [COLOR=#ff0000]is this CORRECT[/COLOR] ? only connection is the wired one i set. i then follow to install fog using sudo,
Here is my Install Setting,
Ip address to be used by this fog server : 192.168.1.101
would you like to set up a router address for the dhcp server : Y
what is the ip address to be used for the router on the dhcp server: 192.168.1.1
would you like to set up a dns address for the dhcp server and client boot image : Y
what is the ip address to be used for the dns on the dhcp server and client boot image: 192.168.1.1
would you like to change the network inter fence from etho : N
Would you like to use fog server for dhcp services : Y
when i install i left all mysql password blank , I’m able to install the server and I’m able to get to the management console, i was able to update the schema. The problem I’m having is when i install the client it asked you for a[COLOR=#ff0000] ip address on the client install wizard I’m unsure what TO PUT HERE , I’ve been putting in 192.168.1.101 IS THIS CORRECT? [/COLOR]
MY MAIN PROBLEM IS WHEN I PXE BOOT MY OTHER MACHINE. When it boots in the in the DHCP when pxe booting I’m able to see some information, ip related but it then starts a [COLOR=#ff0000]tftp and it gives a ERROR Times out[/COLOR]. I’m clueless .WHAT TO DO HERE PLEASE HELP ANY HELP WILL BE GREATLY APPRECIATED THANK You
IS THERE ANYTHING I MISS DURING THE INSTALL ik you have to gedit the passwords file which i did. I BELIEVE MY SERVER IS SET UP OK BC IM able to get to the management console. or the dhcp is not starting i have been reading the wiki’s and spice but has had no luck fairly new to linux but willing to learn.
RE: STATIC IP PLEASE HELP
this may seem like a dumb question but I’m new and willing,to learn. I’m fairly new to Linux and mostly do hardware. is the ip address that we just assign to address(192.168.3.3) , is that any class c ip address that we just give it? netmask seem to always remain the same as (255.255.255.0). IM sorry just a noobie willing to learn. hopefully other can relate to this discussion who have similiar issue.
STATIC IP PLEASE HELP
I’m installing fog on a workstation to use as a server. I’m having problems setting up a static IP. I have a workstation that i will be using as a server to re-image about 30 laptops. Computer is connected to the local network such as veh.local domain. when i install Linux my internet connection lets me get to the internet, however when i try to configure my connection setting to a static IP, I’m no longer able to get into the internet. The connection reminds connected connected but when i open my Firefox browser the internet does not work. The Question is how do you properly configure a STATIC IP and if possible ,how would i be able to find my proper IP sub-mask and gateway to enter correctly. PLEASE HELP CLARIFY THIS PROCEDURE. Currently running Ubuntu 12.04 LTS with fog 0.32. internet connection is needed to download actual fog .032 after Linux install. what I’m i doing wrong ??? PLEASE HELP.