• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login
    1. Home
    2. jes6309
    3. Posts
    J
    • Profile
    • Following 0
    • Followers 0
    • Topics 1
    • Posts 16
    • Best 3
    • Controversial 0
    • Groups 0

    Posts made by jes6309

    • RE: Failed to get an IP via DHCP!

      @Sebastian-Roth After reverting the port back to auto and leaving port-fast enabled, registration and imaging was still successful.

      Looks like port-fast was the fix.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @Sebastian-Roth Thanks! Setting static speed and enabling port-fast worked! I am now able to successfully register the host.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @Sebastian-Roth I will start looking into these things, but if a switch configuration was causing the issue, wouldn’t I have run into the problem before upgrading to trunk? Never had these issues occur on the normal version of fog.

      Thanks!

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 Ok, I think its 10ec:8136

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 Ok here is the info I believe you are looking for:

      Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)

      Subsystem: Hewlett-Packard Company Device 8137

      Kernel driver in use: r8169

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 Yup!

      [Thu Apr 14 root@fogclient /]# is what I am seeing. What commands did you want me to run?

      I went ahead and ran lshw -short and ethernet controller listed is “RTL8101E/RTL8102E PCI Express Fast Ethernet Controller”

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 Ok that got me past “init.xz… ok”

      However, I’m getting the “Sending discover…” message again. This is with the debug deploy task scheduled.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 hmmmm

      idk if this will help, but when I run Kernel Update (after having fixed the credentials as per Wayne) it gets stuck on “Moving to TFTP server…”. If I close out of the operation and attempt to run Kernel Update again, I receive the “Type: 2, File: /var/www/html/fog/lib/fog/fogftp.class.php, Line: 144, Message: ftp_put(/var/www/html/fog/service/ipxe/bzImage): failed to open stream: No such file or directory.” error. On the fog server, if i check /var/www/html/fog/service/ipxe, “bzImage” is nowhere to be found. Note, it was present before attempting the kernel update. It’s as if the kernel update operation is just deleting the bzImage directory rather than actually updating it. I feel like these bizarre errors I’m getting when booting my client to fog and/or registering it as a host has got to be related to a bad kernel, or, after “updating”, a missing kernel.

      I’m just at loss for a fix.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 Ok I’ve taken these steps, but when the laptop boots to the network, it gets up to “init.xz… ok” and just stops.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      Update: I just noticed that if I go under fog configuration in the management console, nothing is listed for either bzImage nor bzImage32. When I run the kernal update, I receive the following error: Type: 2, File: /var/www/html/fog/lib/fog/fogftp.class.php, Line: 144, Message: ftp_put(/var/www/html/fog/service/ipxe/bzImage): failed to open stream: No such file or directory.

      Is this related?

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @Wayne-Workman Thank you. I’ve checked and there doesn’t seem to be an issue with the cable/ports. I’ve also tested with known good cables/ports and the results have been the same.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 HP Model Number: 15-af131dx. Here is the spec sheet http://support.hp.com/id-en/document/c04797004 and here is the hp support/driver page http://support.hp.com/us-en/drivers/selfservice/hp-15-af100-notebook-pc-series/8543365/model/8961406#Z7_3054ICK0K8UDA0AQC11TA930O2.

      Thanks again!

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      @george1421 oh I see. Unfortunately the laptop is at work and I have left for the day. I will get the model number for you first thing tomorrow.

      posted in FOG Problems
      J
      jes6309
    • RE: Failed to get an IP via DHCP!

      Thanks for the reply.

      It is a HP Laptop. It definitely has the NIC driver, as it is a fully operational windows 10 laptop.

      And yes, I am able to pxe boot successfully. However, once I get to the Fog Menu and select Full Host Reg & inventory, it fails with the error in the image.

      Kinda baffling.

      posted in FOG Problems
      J
      jes6309
    • Failed to get an IP via DHCP!

      Hi guys

      So, when I boot to fog and select “Perform full host registration…” I get the following (photo attached):

      Sending discover…
      Sending discover…
      Sending discover,…
      No lease, failing

      I’ve searched for a solution but have come up empty.

      I’m running the latest trunk version (7176) on Ubuntu Desktop 14.04LTS.

      Never had this happen on earlier versions of fog. Any help is much appreciated. Even if it’s just to tell me what to look for.

      Thanks!! photo: (https://drive.google.com/open?id=0BxKRFupXcJ0SRFdUai1QbDFCRm8)

      posted in FOG Problems
      J
      jes6309
    • 1 / 1