@george1421 Not sure if you have any control over it, but you may want to update the uninstall article on the wiki for systemd. I may have bad or redundant service files from previous install attempts, unless they were overwritten.
J
Best posts made by JazKW
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
Latest posts made by JazKW
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@sebastian-roth Can go ahead and mark this as solved. Thank you for the help.
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@sebastian-roth No I was not able to connect to the Fog server from another PC.
EDIT: Disabling firewalld got it to work.
This is what I got from the iptables:
[root@FOG init.d]# sudo iptables -L -n -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT udp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:67 0 0 ACCEPT tcp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:67 5331K 892M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED 504K 31M ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 196K 25M INPUT_direct all -- * * 0.0.0.0/0 0.0.0.0/0 196K 25M INPUT_ZONES_SOURCE all -- * * 0.0.0.0/0 0.0.0.0/0 196K 25M INPUT_ZONES all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate INVALID 132K 17M REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * virbr0 0.0.0.0/0 192.168.122.0/24 ctstate RELATED,ESTABLISHED 0 0 ACCEPT all -- virbr0 * 192.168.122.0/24 0.0.0.0/0 0 0 ACCEPT all -- virbr0 virbr0 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- * virbr0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 REJECT all -- virbr0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_direct all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_IN_ZONES_SOURCE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_IN_ZONES all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_OUT_ZONES_SOURCE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_OUT_ZONES all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate INVALID 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 5282K packets, 800M bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT udp -- * virbr0 0.0.0.0/0 0.0.0.0/0 udp dpt:68 5840K 886M OUTPUT_direct all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD_IN_ZONES (1 references) pkts bytes target prot opt in out source destination 0 0 FWDI_public all -- em1 * 0.0.0.0/0 0.0.0.0/0 [goto] 0 0 FWDI_public all -- + * 0.0.0.0/0 0.0.0.0/0 [goto] Chain FORWARD_IN_ZONES_SOURCE (1 references) pkts bytes target prot opt in out source destination Chain FORWARD_OUT_ZONES (1 references) pkts bytes target prot opt in out source destination 0 0 FWDO_public all -- * em1 0.0.0.0/0 0.0.0.0/0 [goto] 0 0 FWDO_public all -- * + 0.0.0.0/0 0.0.0.0/0 [goto] Chain FORWARD_OUT_ZONES_SOURCE (1 references) pkts bytes target prot opt in out source destination Chain FORWARD_direct (1 references) pkts bytes target prot opt in out source destination Chain FWDI_public (2 references) pkts bytes target prot opt in out source destination 0 0 FWDI_public_log all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FWDI_public_deny all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FWDI_public_allow all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 Chain FWDI_public_allow (1 references) pkts bytes target prot opt in out source destination Chain FWDI_public_deny (1 references) pkts bytes target prot opt in out source destination Chain FWDI_public_log (1 references) pkts bytes target prot opt in out source destination Chain FWDO_public (2 references) pkts bytes target prot opt in out source destination 0 0 FWDO_public_log all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FWDO_public_deny all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FWDO_public_allow all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FWDO_public_allow (1 references) pkts bytes target prot opt in out source destination Chain FWDO_public_deny (1 references) pkts bytes target prot opt in out source destination Chain FWDO_public_log (1 references) pkts bytes target prot opt in out source destination Chain INPUT_ZONES (1 references) pkts bytes target prot opt in out source destination 140K 18M IN_public all -- em1 * 0.0.0.0/0 0.0.0.0/0 [goto] 47 6862 IN_public all -- + * 0.0.0.0/0 0.0.0.0/0 [goto] Chain INPUT_ZONES_SOURCE (1 references) pkts bytes target prot opt in out source destination Chain INPUT_direct (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT 2 -- * * 0.0.0.0/0 0.0.0.0/0 Chain IN_public (2 references) pkts bytes target prot opt in out source destination 196K 25M IN_public_log all -- * * 0.0.0.0/0 0.0.0.0/0 196K 25M IN_public_deny all -- * * 0.0.0.0/0 0.0.0.0/0 196K 25M IN_public_allow all -- * * 0.0.0.0/0 0.0.0.0/0 30 1827 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 Chain IN_public_allow (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ctstate NEW 15 975 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:69 ctstate NEW 63870 7604K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:49152:65532 ctstate NEW Chain IN_public_deny (1 references) pkts bytes target prot opt in out source destination Chain IN_public_log (1 references) pkts bytes target prot opt in out source destination Chain OUTPUT_direct (1 references) pkts bytes target prot opt in out source destination ``` -
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@george1421 Not sure if you have any control over it, but you may want to update the uninstall article on the wiki for systemd. I may have bad or redundant service files from previous install attempts, unless they were overwritten.
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@george1421 There is one other thing I’ve noticed each time I went to uninstall and reinstall FOG, none of the services exist.
When I go to run these commandssudo rm /etc/init.d/FOGImageReplicator sudo rm /etc/init.d/FOGMulticastManager sudo rm /etc/init.d/FOGScheduler```I get:
[root@FOG NetworkManager]# sudo rm /etc/init.d/FOGImageReplicator
rm: cannot remove ‘/etc/init.d/FOGImageReplicator’: No such file or directoryFor each one; and when I go to check where they’re supposed to be located, they aren’t there
[root@FOG init.d]# ls -la total 40 drwxr-xr-x. 2 root root 70 Aug 6 10:33 . drwxr-xr-x. 10 root root 127 Aug 6 10:32 .. -rw-r--r--. 1 root root 18104 Jan 2 2018 functions -rwxr-xr-x. 1 root root 4334 Jan 2 2018 netconsole -rwxr-xr-x. 1 root root 7293 Jan 2 2018 network -rw-r--r--. 1 root root 1160 Apr 11 03:36 README -
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@george1421 Stopping dnsmasq didn’t change anything, still the same result and same error. Need to review network policy before attempting a packet capture.
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@george1421 It shouldn’t be. I have it set up with the windows DHCP server. If dnsmasq is running, it shouldn’t. So at this point I would be asking how to turn it off, because it seems like it’d be what’s causing the Host machine not to be able to PXE boot.
-
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@sebastian-roth This is the result I got from the two commands:
[root@FOG fog]# ps ax | grep dhc 4197 ? S 0:00 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelper 4198 ? S 0:00 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelper 19862 pts/0 S+ 0:00 grep --color=auto dhc [root@FOG fog]# cat /opt/fog/.fogsettings ## Start of FOG Settings ## Created by the FOG Installer ## Find more information about this file in the FOG Project wiki: ## https://wiki.fogproject.org/wiki/index.php?title=.fogsettings ## Version: 1.5.4 ## Install time: Thu 09 Aug 2018 08:48:22 AM EDT ipaddress='192.168.1.87' copybackold='0' interface='eth0' submask='255.255.255.0' routeraddress='192.168.1.18' plainrouter='192.168.1.18' dnsaddress='192.168.1.18' username='fog' password='Qigd/N34xpA2aa0amHlKfnz+zbeHkxgM8l4RwVAW0tk=' osid='1' osname='Redhat' dodhcp='N' bldhcp='0' dhcpd='dhcpd' blexports='1' installtype='N' snmysqluser='root' snmysqlpass='' snmysqlhost='localhost' installlang='0' storageLocation='/images' fogupdateloaded=1 docroot='/var/www/html/' webroot='/fog/' caCreated='yes' httpproto='http' startrange='' endrange='' bootfilename='undionly.kpxe' packages='bc curl gcc gcc-c++ genisoimage gzip httpd lftp m4 make mariadb mariadb-server mod_ssl mtools net-tools nfs-utils php php-bcmath php-cli php-common php-fpm php-gd php-ldap php-mbstring php-mcrypt php-mysqlnd php-process syslinux tar tftp-server unzip vsftpd wget xinetd xz-devel ' noTftpBuild='' notpxedefaultfile='' sslpath='/opt/fog/snapins/ssl/' backupPath='/home/' php_ver='' php_verAdds='' sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key' ## End of FOG Settings [root@FOG fog]# -
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@sebastian-roth TFTP was not enabled in firewalld so it was not getting through, but I’ve run into another error.
Could not boot: Connection timed out (http://ipxe.org/4c0a6035)
I did check the specified files on the wiki and the IP address is correct for both files. But in .fogsettings submask has: ‘Error: =4099<UP,BROADCAST,MULTICAST> is not recognized’ instead of an actual subnet mask, would this be the possible cause? -
RE: PXE-E32 Error; Not sure what went wrong.posted in FOG Problems
@sebastian-roth The ip address in option 66 and that of the fog server match.
