@Wayne-Workman said:
When I ask about specific settings, did you put anything into the drive field for the tablet? What boot file are you using for it?
Nothing in the drive field was needed (fog recognized the SSD as /dev/sda ) and I used the stock truck ipxe.efi boot file.
@Wayne-Workman said:
@jackdub Any specific settings?
Nothing in particular, installed the latest trunk and used the default kernel. It images without any major issues.
However at the end of the image process, I am noticing some sort of uuid error. (I’m not sure if this is because I’m using one single USB-to-Ethernet dongle or if it’s something else that’s causing the error.
Just wanted to follow up on this :
I was able to install FOG trunk (5964) on Ubuntu 14.04 LTS on a test server and successfully registered, uploaded, and deployed a client device with Windows 10 image using UEFI PXE boot (with Secure Boot OFF).
Thanks for all your recommendations!
Can’t wait for the stable 1.3.0 release 
I’m logged in as root, so sudo might be unnecessary.
In any case, I am going to wget the latest trunk from http://mastacontrola.com/fog_trunk.tar.bz2
Then clean install the trunk build on a test fog server.
I’d like to continue to use Ubuntu… which version of Ubuntu is preferred when using trunk?
I’m running FOG on Ubuntu 10.0.4 LTS
Could you possibly link the 64-bit bzImage trunk kernel?
Now I’m having difficulty upgrading to trunk on my current 1.2.0 install… 
Upon running ./installfog.sh the script fails at
* Installing package: php5-mysqlnd…Failed!
Thank you for the responses!
I will attempt to upgrade to trunk and see if it resolves my issue.
Hello fellow foggers,
I’ve recently been tasked with configuring/imaging several dozen DELL Venue 11 Pro (7130) tablet devices. I have set the BIOS to UEFI boot mode with Secure Boot OFF.
I am able to PXE boot to the FOG menu screen (using ipxe.efi), however when I attempt to register the host, image, or run Client System Information, I receive the following error:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
Kernel Offset: Disabled
I’m convinced the problem is entirely kernel related. I am running FOG 1.2.0 and have tried the 64-bit kernels: 3.19.3 & 4.1.2 & 4.1.0 and many others and receive the same result. These particular tablets were shipped with a SanDisk X110 256GB SSD drive.
Could anyone provide a link to download a more recent 64-bit bzImage kernel than the ones I’ve tried above or provide any possible suggestions?
Thanks!