Thanks Tom! That did it!

I had database issues with the restart, though. It wanted me to update the database (as during initial installation) and when I clicked it, I received a long list of errors due to the database already being there. I followed some of the fixes on modifying the config.class.php and .fogsettings with no luck. I re-installed FOG which required me to do some dnsmasq changes as well. FOG is working again, but I’ll continue to restart and try more fixes.

Thanks again!!!

I have finished the re-install and so far so good! I am both capturing and deploying images, even the laptop I initially noticed the problem with is taking the restored-from-back-up image.

I am currently restoring the rest of the images and will test more tomorrow. I will even restart the FOG server and hope this doesn’t happen again! Haha!

At this time, I think all of the ‘fixes’ for me trying to get the original TFTP timeout issue resolved (before I tried dnsmasq) may be the cause for this. With my inexperience with Linux I was trying what worked for others without actually knowing what I was changing.

The only issue I seem to have now is after I installed dnsmasq, I can no longer browse the internet. It’s a dns issue, for sure, as I can ping IPs, just not names. This also was happening before I re-installed. I’ll work that issue out with the dnsmasq peeps.

I will update after the re-start!

Ahh, my fault, sorry, I was typing with my head over my shoulders. Here is an actual copy/paste of the etc/exports

/images *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/images/dev *(rw,sync,no_wdelay,no_root_squash,insecure)

I too, don’t like re-installing as we never find out the cause. However, another install would help my experience doing so, and doing a fresh setup knowing I will need to use dnsmasq would be good for me as well.

I’ve got a back-up of all the created images anway, which makes it even less of a hassle.

I certainly appreciate all of the awesome help you’ve provided!

I will update after I get the install complete.

It is a head scratcher, for sure! Do you think a re-install is in order at this point?

Hmm, I seem to have some issue with getting the info posted. I cannot attach the plain text file, and when I try to post as I have been posting, it says it is spam.

Here is the output of what I am able to get by the spam filter. It basically continues down listing each of the images similar to the “VEIGoldenImage” and “VEIUbuntu1404x647010” files below.

@VEI-FOG:~# ls -alR /images
/images:
total 92
drwxrwxrwx 23 root root 4096 Mar 5 11:07 .
drwxr-xr-x 25 root root 4096 Feb 10 11:04 …
drwxrwxrwx 2 root root 4096 Mar 5 11:07 dev
-rwxrwxrwx 1 root root 0 Feb 25 16:36 .mntcheck
drwxrwxrwx 2 root root 4096 Feb 10 11:04 postdownloadscripts
drwxrwxrwx 2 root root 4096 Feb 19 15:25 PRC04
drwxrwxrwx 2 root root 4096 Feb 18 17:08 VEIGoldenImage
drwxrwxrwx 2 root root 4096 Mar 5 10:38 VEIUbuntu1404x647010
drwxrwxrwx 2 root root 4096 Feb 12 14:21 VEIWin75520Laptop
drwxrwxrwx 2 root root 4096 Feb 11 14:41 Win76430
drwxrwxrwx 2 root root 4096 Feb 12 14:08 Win7Accounting
drwxrwxrwx 2 root root 4096 Feb 16 16:47 Win7Acer4620Laptop
drwxrwxrwx 2 root root 4096 Feb 13 11:20 Win7BaseImage
drwxrwxrwx 2 root root 4096 Feb 13 12:07 Win7CivilDesigner
drwxrwxrwx 2 root root 4096 Feb 12 15:32 Win7CivilEngineer
drwxrwxrwx 2 root root 4096 Feb 16 17:09 Win7CostControls
drwxrwxrwx 2 root root 4096 Feb 12 15:38 Win7IEwCAD
drwxrwxrwx 2 root root 4096 Feb 12 15:28 Win7InstrumentElectrical
drwxrwxrwx 2 root root 4096 Feb 16 14:12 Win7Mechanical
drwxrwxrwx 2 root root 4096 Feb 18 15:10 Win7PipingwCAD
drwxrwxrwx 2 root root 4096 Feb 12 15:25 Win7Process
drwxrwxrwx 2 root root 4096 Feb 12 15:49 Win7ProjectControls
drwxrwxrwx 2 root root 4096 Mar 5 10:55 Win7TestImage
drwxrwxrwx 2 root root 4096 Feb 19 09:06 Win7ZboxAcer

/images/dev:
total 8
drwxrwxrwx 2 root root 4096 Mar 5 11:07 .
drwxrwxrwx 23 root root 4096 Mar 5 11:07 …
-rwxrwxrwx 1 root root 0 Feb 25 16:38 .mntcheck

/images/postdownloadscripts:
total 12
drwxrwxrwx 2 root root 4096 Feb 10 11:04 .
drwxrwxrwx 23 root root 4096 Mar 5 11:07 …
-rwxrwxrwx 1 root root 233 Feb 10 11:04 fog.postdownload

/images/PRC04:
total 56336000
drwxrwxrwx 2 root root 4096 Feb 19 15:25 .
drwxrwxrwx 23 root root 4096 Mar 5 11:07 …
-rwxrwxrwx 1 root root 512 Feb 19 15:24 d1.mbr
-rwxrwxrwx 1 root root 78557 Feb 19 15:24 d1p1.img
-rwxrwxrwx 1 root root 192215879 Feb 19 15:25 d1p2.img
-rwxrwxrwx 1 root root 57495742045 Feb 19 16:54 d1p3.img

/images/VEIGoldenImage:
total 12590772
drwxrwxrwx 2 root root 4096 Feb 18 17:08 .
drwxrwxrwx 23 root root 4096 Mar 5 11:07 …
-rwxrwxrwx 1 root root 1 Feb 18 16:55 d1.fixed_size_partitions
-rwxrwxrwx 1 root root 0 Feb 18 16:58 d1.has_grub
-rwxrwxrwx 1 root root 1048576 Feb 18 16:58 d1.mbr
-rwxrwxrwx 1 root root 259 Feb 18 16:58 d1.minimum.partitions
-rwxrwxrwx 1 root root 15 Feb 18 16:55 d1.original.fstypes
-rwxrwxrwx 1 root root 259 Feb 18 16:55 d1.original.partitions
-rwxrwxrwx 1 root root 0 Feb 18 16:55 d1.original.swapuuids
-rwxrwxrwx 1 root root 8141788569 Feb 18 17:08 d1p1.img
-rwxrwxrwx 1 root root 4750076687 Feb 18 16:31 VEIGoldenImage

/images/VEIUbuntu1404x647010:
total 1788480
drwxrwxrwx 2 root root 4096 Mar 5 10:38 .
drwxrwxrwx 23 root root 4096 Mar 5 11:07 …
-rwxrwxrwx 1 root root 4 Mar 5 10:34 d1.fixed_size_partitions
-rwxrwxrwx 1 root root 0 Mar 5 10:34 d1.has_grub
-rwxrwxrwx 1 root root 1048576 Mar 5 10:34 d1.mbr
-rwxrwxrwx 1 root root 310 Mar 5 10:34 d1.minimum.partitions
-rwxrwxrwx 1 root root 48 Mar 5 10:34 d1.original.fstypes
-rwxrwxrwx 1 root root 310 Mar 5 10:34 d1.original.partitions
-rwxrwxrwx 1 root root 47 Mar 5 10:38 d1.original.swapuuids
-rwxrwxrwx 1 root root 1830317087 Mar 5 10:38 d1p1.img
-rwxrwxrwx 1 root root 551 Mar 5 10:38 d1p2.img

Below are the results of the commands.

root@VEI-3000D:/home/administrator# sudo mkdir -p /mnt/nfstest && sudo mount -v 10.0.2.250:/images /mnt/nfstest
mount: no type was given - I’ll assume nfs because of the colon
mount.nfs: timeout set for Thu Mar 5 08:41:21 2015
mount.nfs: trying text-based options ‘vers=4,addr=10.0.2.250,clientaddr=10.0.2.153’

root@VEI-3000D:/home/administrator# sudo ls -al /mnt/nfstest
total 12
drwxrwxrwx 22 root root 4096 Feb 27 09:45 .
drwxr-xr-x 3 root root 4096 Mar 5 08:37 …
drwxrwxrwx 2 root root 4096 Feb 19 16:54 dev

root@VEI-3000D:/home/administrator# sudo umount /mnt/nfstest
root@VEI-3000D:/home/administrator#

Oddly enough, I have done some testing and I am able to capture images via FOG. However, I receive the ‘permissions denied’ error any time I try to deploy an image using various workstations and images. Any ideas on why this is happening?

Thanks again!

My fog servers IP is 10.0.2.250

Yes! There is now a difference with those commands. They seem to be working now! (I did have to install nfs-common on the workstation).

root@VEI-3000D:/home/administrator# sudo mkdir -p /mnt/nfstest && mount -v 10.0.2.250:/images /mnt/nfstest
mount: no type was given - I’ll assume nfs because of the colon
mount.nfs: timeout set for Wed Mar 4 11:14:44 2015
mount.nfs: trying text-based options ‘vers=4,addr=10.0.2.250,clientaddr=10.0.2.153’

root@VEI-3000D:/home/administrator# sudo umount /mnt/nfstest

root@VEI-3000D:/home/administrator# sudo mount -v 10.0.2.250:/images/dev /mnt/nfstest
mount: no type was given - I’ll assume nfs because of the colon
mount.nfs: timeout set for Wed Mar 4 11:15:30 2015
mount.nfs: trying text-based options ‘vers=4,addr=10.0.2.250,clientaddr=10.0.2.153’

root@VEI-3000D:/home/administrator# sudo umount /mnt/nfstest && rmdir /mnt/nfstest
root@VEI-3000D:/home/administrator#

Alright, from a workstation on the same subnet I tried the commands you listed…here are the results.

root@VEI-3000D:~# sudo mkdir -p /mnt/nfstest && mount -v 10.0.2.250:/images /nfstest
mount: no type was given - I’ll assume nfs because of the colon
mount: mount point /nfstest does not exist

root@VEI-3000D:~# sudo umount /nfstest
umount: /nfstest: not found

root@VEI-3000D:~# sudo mount -v 10.0.2.250:/images/dev /nfstest
mount: no type was given - I’ll assume nfs because of the colon
mount: mount point /nfstest does not exist

root@VEI-3000D:~# umount /nfstest && rmdir /nfstest
umount: /nfstest: not found

And, just for further testing to eliminate the folder not being there, I tried to mount to the /images folder.

root@VEI-3000D:~# sudo mount -v 10.0.2.250:/images
mount: can’t find 10.0.2.250:/images in /etc/fstab or /etc/mtab
root@VEI-3000D:~#

Thank you again for your help!!!

Wayne, I have disconnected the drive, no change.

Frank, I have attached the output of the permissions. I am loading another PC with Ubuntu to help with testing.
The FOG setup should have made the share able to be mounted even after a restart, correct?

Thank you again, for your help. Getting into Linux has a decently steep learning curve and I appreciate your help!

[url=“/_imported_xf_attachments/1/1721_IMAG2054.jpg?:”]IMAG2054.jpg[/url]

Hello again, I have been using FOG for about a month or so with great success. I have uploaded about 30 different images to the server without a problem…until now.

I restarted the FOG server to install an internal back-up drive. I received the TFTP timeout, but then remembered to restart tftpd-hpa which resolved that issue.

I was able to register a new host, but now receive “Permission Denied” on the host when attempting to mount the /images folder on the server.

Most issues I see with this are when people move their /images folder to a different location. I have not made any changes other than the drive (which I have not mounted) and the restart.

I have tried a few fixes with no luck.

So far I have made sure the firewall is turned off, and /etc/exports looks like this…

/images *(ro_sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/images/dev *(rw,sync,no_wdelay,no_root_squash,insecure)

This is on Ubuntu 14.04 with FOG 1.2.0

Again, this has been running well until the restart. Being so new to this, is there anything else I should check that a restart may have done?

Thank you again for your help!

[url=“/_imported_xf_attachments/1/1716_IMAG2053.jpg?:”]IMAG2053.jpg[/url]