Posts made by FrancoDin

@Sebastian-Roth

Ok, I was thinking maybe some thing about the dchp, when the PC are on. I guess there is no way.
Thanks anyway.

But I will need to add all the PC to host manually, then add them to the group, Is faster if I manually check the inventory (whit fog).

Hello, Is there any way of getting an inventory of the hardware of the pc, but whitout going from pc to pc booting from one at the time?.
The idea is to make al PC in the net to auto send the inventory to the server, doing all of this from the server.

@george1421
Ok, you are my new god.
It was an extra character in that line, a type-o.
Now all is working perfectly.
Just one final doubt, what does dnsmasq do to the dhcp?, I am worry that maybe an error in the net and the DHCP failed for the server whit dnsmasq, when I put the server whit DHCP at the start, I lost connection in some devices because the two DHCP overwrite eachother. I am sure this not happen whit dnsmasq but, just wanna be sure.
And sorry for the bad english.

@george1421
ahh ok.
I get to here:

When I enter Linux MInt 17.3 It first load 100%, then ok.
and I get to this

@FrancoDin
Also… why the route is
kernel tftp://${fog-ip}/mint/18.1/vmlinuz
when actually the vmlinuz is in /tftpboot/mint/18.1

@george1421

Thank you a Lot, all working now.
Just one think, I follow this guide (https://forums.fogproject.org/topic/10944/using-fog-to-pxe-boot-into-your-favorite-installer-images/9) to add Linux Mint, to the fog menu. But when I boot from there Its says “Connection time out”, its has anything to deal whit dnsmasq?

Also, in the parameters:
kernel tftp://${fog-ip}/mint/18.1/vmlinu
Should go like this
kernel tftp://${10.0.0.7}/mint/18.1/vmlinuz
or
kernel tftp://$10.0.0.7/mint/18.1/vmlinuz
in the 3 different times its appears.

@george1421

Yhep, that broke the fog.
But I managed it, to update the dnsmasq, after manually instaling 80 packes from https://www.debian.org/distrib/packages , that seems to work for the pxe boot error, but it direct me to my previous IP, so I will reinstall ubuntu server, and try all again, because I try to reinstall fog, but have a problem deleting it and when try to reinstall its gets an error instalin packges,(maybe I broke that aswell).

@george1421

Now it works, but when I go to the PC and boot:

Auto-Select:
Boot to FOG

BOOT Server ip:10.0.0.2
TFTP.
PXE-T01: File not Found
Pxe-E3B: TFTP Error - File not found
PXE-M0F: Exiting intel PXE ROm.
Fatal: Could not read from the boot medium

Also I see that maybe there is a problem in the IP, because there is another device whit the ip 10.0.0.2 so I will fix that tomorrow and tell you what happen

@george1421

So its fail at running, and the version of dnsmasq is 2.75
I am editing that file whit nano, because I am using Putty, and I cant coppy paste files in the ubuntu server at the moment. The fog isent runing in virtual box.

I just realized the error is in spanish, sorry my bad, that red line says:
Rank of dhcp not valid, in line 26 of lstp.conf
Fail at the start

@george1421

The target computer is in the same subnet as the dhcp server, and yes the mikrotik is the normal dhcp server.

@george1421

I did as you say, reinstall complety fog, and remove dhcp from the server

@george1421 I cant access to the router, so lest go whit plan B

(I will try dnsmasq in the server)

@george1421

I should stop the DHCP in the server? so it works?

@george1421
Thank you for answering.
1-Its a PC whit Linux Mint 17.3 64 bits Cinammon
2- Router Mikrotik
3- Yes, that is the IP where the server is

Hello, I cant figure out how to solve this, I spend a while now. The server ip is 10.0.0.72, maybe the error is because its says that the DHCP IP is .72?, I dont knwo to much about networking, if so how to change it?

Some times i get this error:

And some times this one