Has anyone in this forum successfully booted unionly.kpxe on Fog 1.20 on an HP Elitedesk 800 G1? Please share specifics including fog
version and system bios version.
Posts made by Fogster
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
No kernel panic on this one. I tried to run the register and inventory function from another laptop which is an older HP Compaq 6710b and it did exhibit a kernel panic error. The system I am trying to get working are HP EliteDesk 800 G1 TWR with Bios version 2.30 (dated 4/22/2014).
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
It boots in seconds to the PXE image then runs a few steps and then stops and moves on to the next in boot sequence.
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
Tried the new bzImage but still no luck with booting this on this new PC. Anybody have any other ideas?
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
Tom,
I noticed you have a new kernel out there on your server that works for many types of PCâs. If I download this kernel where do I replace the file bzImage. I found that file in /var/www/fog/service/ipxe and I assume that I would replace the file that is there in that directory? Would I then need to restart the server?Thanks!
-
RE: HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
[quote=âTom Elliott, post: 36820, member: 7271â]I donât know if it will fix anything, but can you try the files in svn:
[code]svn co https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp
cp tftp/* /tftpboot/
[/code][/quote]Downloaded files from svn, but PC does the same thing in that it boots and passes with an OK on the following steps:
Configuring OK
boot.php OK
bg.png OKThen it craps out and canât go any futher.
-
HP EliteDesk 800 G1 TWR fails on undionly.kpxe and undionly.kkpxe
Hi,
I am trying to PXE boot HP Elitedesk 800 G1 tower systems to a Fog server running on Ubuntu 14 server with Fog 1.2.0 .
The PCâs will PXE boot in Legacy mode but once it tries to process the boot file undionly.kpxe it fails and moves onto the next boot device in boot order from BIOS.
I have added the device and itâs MAC address into the FOG console and have created a new image and assigned that image to the machine.
I am trying to PXE boot the PC to take a âfactoryâ image first and then I will proceed in customizing the PC for our needs and take an image of that custom image as well but I cannot seem to successfully PXE boot.
Are there other files I should consider booting from the TFTPboot directory?
I have the BIOS set to perform a legacy boot on the NIC as UEFI did not work either.
The boot goes so quickly I cannot seem to capture the error from the PC screen before it moves onto the next device to boot in sequence and clears the screen.
Any suggestions?
Thanks!