OK, so the installation using php5.5 worked succesfully, rebooted and tried to download image to a machine and encountered a chain load error and could not boot.
http://172.16.61.17/fog/service/ipxe/boot.php …Input/output error
Could not boot: Input/output error
Chainloading failed, hit ‘s’ for the ipxe shell; reboot in 10 seconds
@Tom-Elliott i now have php 5.5 the command you posted did not work correctly, i wget the the remi repo and it gave me remi-php55. Is that good enough?
yum install git -y
cd ~
mkdir git
cd git
git clone --depth 1 https://github.com/FOGProject/fogproject.git
cd fogproject/bin
./installfog.sh
Was told this was a centos 7 server, in fact this is centos 6.8
Should have clarified, just realized this is centos 6.8
Package php-5.3.3-48.el6_8.x86_64 already installed and latest version
Nothing to do
[root@fog-server commons]# php -v
PHP 5.3.3 (cli) (built: Aug 11 2016 20:33:53)
Copyright 
1997-2010 The PHP Group
Zend Engine v2.3.0, Copyright 1998-2010 Zend Technologies
Installing over old 1.2.0 of fog
Iptables disabled
selinux is permissive
[error] [client 127.0.0.1] PHP Parse error: syntax error, unexpected ‘&’ in /var/www/html/fog/commons/init.php on line 110
Here is the init.php
110 foreach ((array)$paths as &$element) {
111 $allpaths[] = dirname($element[0]);
112 unset($element);
113 }
OK so I changed to 127.0.0.1 and it still fails database backup.
I tailed the log and here is what it says
connecting to 127.0.0.1 connected
Http request sent, awaiting response 500 internal server error
@Tom-Elliott rgr that on it now
Ok so here is another issue.
The fog server is in a non-connected envorinment, meaning is is not meant to connect to the net. We have a 172.x.x.x ip address. So when install using dhcp on our corporate network of 10.x.x.x, it fails to reach the backup of the management at 172.x.x.x
I then placed on the 172.x.x.x network and ran the install.sh and it fails on getting checksum and files and inits…
The server resides on a 172.x.x.x network, not sure how to make it get past this. checksum and init thing
Reinstalling 1.3.0 now. will report results.
Again, thanks for the quick replies.
I recently tried to upgrade to trunk and it failed, so I reinstalled 1.2.0 back on our fog server.
I created a task for a computer to download an image.
When I pxe boot the client computer i get the following:
/default.ipxe…operation not supported (http://ipxe.org/3c126003)
Any ideas?
DHCP is configured on our windows domain controller and that has not changed. Is there a place in fog settings to point fog to the dns server?
Thanks for the quick reply fellas. I love this forum and the software. Updating now and will report back.
The FOG server is actually running CENTOS 6.8
The Fog machine being imaged is running CENTOS 7.2
We image our centos 7.2 system which is using UUID in /etc/sftab. Once imaging is complete, the new machines show “No swap found”. I look at /e/tc/fstab and the UUID of the swap partition is the same as the imaged machine and does not match the new system.
I dont mind using UUID , I just want to know why FOG is not swapping this out.
We are using a new fog from 2 days ago, 1.2.0
V/R
Derek