Posts made by fabritrento

@fabritrento @Tom-Elliott with the kernel 6.1.22 developement the deploy/capture speed si faster, so plan to insert this kernel version as default on the next stable release

@Tom-Elliott

I installed
Date:
Version:
Architecture:
March 31, 2023
6.1.22
AMD/Intel 64 Bit

next week i test newly a multicast process of 23pc togheter then i can compare the network troughput.
if speed is ok we can candidate 6.1.22 to stable fog release, otherwise we can rollback to fog 1.5.10 stable kernel version that i’m sure that are faster

@Tom-Elliott how i can select the kernel version to be used in deploy or capture processes on pc?

@Tom-Elliott can you remove the bandwidth limitation? or put sliders on the web interface to decide the limit?

I installed developement 1.5.10.1629 version and tryed to do a multicast deploy on 4 identical pc.
The process is very slow on a gigabit ethernet network the speed is only of 1,09GB per minute.
There are changes in multicast deploy from 1.5.10 to 1.5.10.1629 version?
with 1.5.10 i can do imaging at full GIGABIT speed, with 1.5.10.1629 the speed is only 0,1453 GIGABIT…

is possible get the domain User Cleanup service to work? i see that is not working due UAC.

i have some windows scripts that delete domain users profile in c:/users and also in regedit. is possible to deploy it in user cleanup service of fog?

@Tom-Elliott problem solved i tested It Just now. Thankyou very much!

@Tom-Elliott said in Lenovo ThinkCentre M900: kernel panic with latest fog 1.5.10.1622 version "Kernel Panic" Issue "XZ decompressor ran out of memory":

git clone https://github.com/FOGProject/fogproject.git --branch=dev-branch

but i can update a developement installed version to a stable release via installfog.sh?

@fabritrento i tryed to use git to download the developement version giving these commands:

git clone https://github.com/FOGProject/fogproject.git
cd fogproject
git checkout dev-branch
git pull

is correct? i never used git
doing as it i get Version: 1.5.10.1629 printed on screen when i try to install fog via installfog.sh

@Tom-Elliott ok if next stable release is planned for 15 nov i can install the developement version and test the bug.
please can you give me the link to download the developement version? i cannot browse the directory in github, i cannot see where developement version is located to download it

@Tom-Elliott the memory of the machine is 8GB. but with fog 1.5.10 works.

@Tom-Elliott sorry but i can’t test i’m in a production environment… i wait until the patch is released to stable branch

@lperoma said in PXE Boot Error - "Kernel Panic" Issue "XZ decompressor ran out of memory":

I should have said I am running 1.5.10.1662 on debian 12.

Before updating to this version, I was using Debian 11 with 1.5.10.10 and had no problems.
Thanks,

seems that i have same problem on old pc. that problem don’t exist with 1.5.10 version:
https://forums.fogproject.org/topic/17699/lenovo-thinkcentre-m900-kernel-panic-with-latest-fog-1-5-10-1622-version

Lenovo ThinkCentre M900: kernel panic with latest fog 1.5.10.1622 version. “Kernel Panic” Issue “XZ decompressor ran out of memory”

with version 1.5.10 all works without problems.

with latest version of fog (1.5.10.1622) i get a kernel panic after iPXE:

i think that is the same bug of this thread: https://forums.fogproject.org/topic/17699/lenovo-thinkcentre-m900-kernel-panic-with-latest-fog-1-5-10-1622-version

Also I have this rEFInd hangup screen… there are a solution? hw Is a hp all-in-one the temporary solution Is to Press f9 at boot to start via pxe so if hard disk Is the First start option in BIOS list Windows starts up normally, but Is Crazy pressing f9 Every time when you have to do a multicast session of 20-30 PC…

@george1421 in this way don’t work i created 2 vendor classes, one PXEClient:Arch:00007 for uefi and onother PXEClient:Arch:00000 for legacy and in this way all works