Update. Client will now boot successfully after running the startup repair utility from the windows 7 install disk.

o_O

Ey3

I did not attempt an update to the SVN version. I can if you think that will work better.

I was thinking about trying to use a rescue disk to write the MBR. Any thoughts?

Ey3

Results of fixparts /dev/sda:

loading MBR data from /dev/sda

unable to read MBR data from ‘/dev/sda’! exiting!

This was on an image download task (On the client I just imaged from the dd image taken in the OP)

Ey3

So I attempted to download the image I took last week and the system is now saying:

BootDevice not found

please install an operating system on your hard disk.

hard disk -(3f0)

f2 system diagnostics

for more information, please visit: [url=“http://www.hp.com\go\techcenter\startup”]www.hp.com\go\techcenter\startup[/url]

Running the diagnostics the hard drive is seen by the bios.

Configuration for download:
host management --> list all hosts --> click on down arrow --> select “[COLOR=#333333][FONT=Trebuchet MS][/FONT][/COLOR][FONT=Ubuntu][COLOR=#555555]Schedule [U]Instant Deployment”[/U] --> reboot box[/COLOR][/FONT]

client comes up and goes through PXE then pulls down the linux image and runs the imaging.

client reboots and complains that it cannot see an OS on the hard drive

I am pulling down a linux image right now to take a look at the disk and make sure that something was actually written. Any ideas would be greatly helpful.

Ey3

[quote=“Tom Elliott, post: 39408, member: 7271”]I have another step for you to try.

Put the image type back to how you want it: (resizable, multipart, whatever)

Recreate your tasking, but make it a debug task. In the Basic Tasks Options click Advanced Options. Look for Upload - Debug.

When the system boots, it will get you to a terminal. Run the command fixparts /dev/sda

It should ask you a few questions. My suspicion is it’s trying to create a “legacy - mbr” file, but there’s still GPT structures on the disk. So it can’t structure the partition prepared for this.

This is just my guess, I really don’t know at this point. If nothing else, would you be willing to try imaging using SVN?[/quote]

That sounds like a very likely cause given the behavior I have seen.

I will test after the holidays and include the results with the other tests you requested.

I’d be down for testing with SVN, do you have any instructions?

Ey3

Sure, I will take a video of all the failure scenarios after the holidays. I have it uploading now, and need to get an image up and show some progress.

Ey3

Open a terminal (or ssh into the FOG server) and type “cat /etc/dhcp/dhcpd.conf” (without the quotes) This will dump your current dhcpd configuration.

To edit from the command line use the text editor of your choice (Example will use nano) like this:

sudo cp /etc/dhcp/dhcpd.conf /etc/dhcp/dhcpd.conf.old
sudo nano /etc/dhcp/dhcpd.conf

At this point the conf file should look something like:

DHCP Server Configuration file.

see /usr/share/doc/dhcp*/dhcpd.conf.sample

This file was created by FOG

use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 123.45.67.5;

subnet 123.45.67.0 netmask 255.255.255.240 {
option subnet-mask 255.255.255.240;
range dynamic-bootp 123.45.67.x 123.45.67.y;
default-lease-time 21600;
max-lease-time 43200;

option domain-name-servers x.x.x.x;

option routers x.x.x.x;

filename “undionly.kkpxe”;

}

Make your edits, and once finished type ^x (ctrl+x) then y (save file) and enter (with current name)

Ey3

Below are the only config options that actually do anything.

Ey3

[url=“/_imported_xf_attachments/1/1521_Screen Shot 2014-11-26 at 11.33.02 AM.png?:”]Screen Shot 2014-11-26 at 11.33.02 AM.png[/url][url=“/_imported_xf_attachments/1/1522_Screen Shot 2014-11-26 at 11.33.24 AM.png?:”]Screen Shot 2014-11-26 at 11.33.24 AM.png[/url][url=“/_imported_xf_attachments/1/1523_Screen Shot 2014-11-26 at 11.33.56 AM.png?:”]Screen Shot 2014-11-26 at 11.33.56 AM.png[/url]

Indeed, I can assign a blank image. That is how I am specifying the dd copy method.

If I assign it to simply upload (with any method) after the pxe boot to the menu the system will loop back to the menu regardless of option chosen. If I do debug upload, the task management works, and it will report to the server that it ran the task then loop back to the shell. If I do debug upload with the dd method selected for the image it will actually do something. It starts uploading.

This is the first image I am uploading.

Some more info on configuration:
Client and server are on a dedicated switch behind a firewall. Communication between client and server goes straight through the switch, management traffic goes across the firewall.

Thank you in advance for the help.

Ey3

OP modified to call it out better.

Ey3

Hello world,

I built a fog server for work and I am only able to get images to upload when the image is set to dd mode via the debug upload. Obviously this is taking a life time.

All other image options loop at various points.

Attempting to auto-register/quick upload/ any menu options from clients just loops.

fog server:
Ubuntu 14.* server
fog version 1.2

client:
hp probook 450

This thread [url]http://fogproject.org/forum/threads/deploy-problem-unable-to-locate-image-store.11941/[/url] is roughly what I see when attempting to upload an image with any other options.

Any thoughts?

Basics: Please provide:
FOG Version (e.g. FOG 0.32, FOG 0.33, FOG 0.01) 1.2
OS Version (e.g. CentOS 6.5, Ubuntu 12.04, Redhat 6.5) Ubuntu 14.04.1

Can you provide your installation details?
This is now included as a long file in 1.1.0 in location /var/log/foginstall.log

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.17.1.5
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0
Donate: 0

Have you checked your apache error logs? Can you provide information from these logs?
[Wed Nov 26 08:31:03.925437 2014] [:error] [pid 13094] [client 172.17.1.10:48256] PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Image is not valid’ in /var/www/fog/lib/fog/Host.class.php:968\nStack trace:\n#0 /var/www/fog/lib/fog/BootMenu.class.php(371): Host->createImagePackage(1, ‘AutoRegTask’, false, false, true, false, ‘mcoers’)\n#1 /var/www/fog/lib/fog/BootMenu.class.php(343): BootMenu->setTasking()\n#2 /var/www/fog/lib/fog/BootMenu.class.php(146): BootMenu->verifyCreds()\n#3 /var/www/fog/service/ipxe/boot.php(14): BootMenu->__construct(Object(Host))\n#4 {main}\n thrown in /var/www/fog/lib/fog/Host.class.php on line 968
[Wed Nov 26 08:31:09.412399 2014] [:error] [pid 13097] [client 172.17.1.10:51325] PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Image is not valid’ in /var/www/fog/lib/fog/Host.class.php:968\nStack trace:\n#0 /var/www/fog/lib/fog/BootMenu.class.php(371): Host->createImagePackage(1, ‘AutoRegTask’, false, false, true, false, ‘mcoers’)\n#1 /var/www/fog/lib/fog/BootMenu.class.php(343): BootMenu->setTasking()\n#2 /var/www/fog/lib/fog/BootMenu.class.php(146): BootMenu->verifyCreds()\n#3 /var/www/fog/service/ipxe/boot.php(14): BootMenu->__construct(Object(Host))\n#4 {main}\n thrown in /var/www/fog/lib/fog/Host.class.php on line 968
[Wed Nov 26 08:36:02.925270 2014] [:error] [pid 1648] [client 172.17.1.10:5767] PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Image is not valid’ in /var/www/fog/lib/fog/Host.class.php:968\nStack trace:\n#0 /var/www/fog/lib/fog/BootMenu.class.php(371): Host->createImagePackage(1, ‘AutoRegTask’, false, false, true, false, ‘mcoers’)\n#1 /var/www/fog/lib/fog/BootMenu.class.php(343): BootMenu->setTasking()\n#2 /var/www/fog/lib/fog/BootMenu.class.php(146): BootMenu->verifyCreds()\n#3 /var/www/fog/service/ipxe/boot.php(14): BootMenu->__construct(Object(Host))\n#4 {main}\n thrown in /var/www/fog/lib/fog/Host.class.php on line 968
[Wed Nov 26 08:40:27.935848 2014] [:error] [pid 13093] [client 172.17.1.10:49542] PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Image is not valid’ in /var/www/fog/lib/fog/Host.class.php:968\nStack trace:\n#0 /var/www/fog/lib/fog/BootMenu.class.php(371): Host->createImagePackage(1, ‘AutoRegTask’, false, false, true, false, ‘mcoers’)\n#1 /var/www/fog/lib/fog/BootMenu.class.php(343): BootMenu->setTasking()\n#2 /var/www/fog/lib/fog/BootMenu.class.php(146): BootMenu->verifyCreds()\n#3 /var/www/fog/service/ipxe/boot.php(14): BootMenu->__construct(Object(Host))\n#4 {main}\n thrown in /var/www/fog/lib/fog/Host.class.php on line 968
[Wed Nov 26 08:51:44.037493 2014] [:error] [pid 1648] [client 172.17.1.10:57677] PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Image is not valid’ in /var/www/fog/lib/fog/Host.class.php:968\nStack trace:\n#0 /var/www/fog/lib/fog/BootMenu.class.php(371): Host->createImagePackage(1, ‘AutoRegTask’, false, false, true, false, ‘mcoers’)\n#1 /var/www/fog/lib/fog/BootMenu.class.php(343): BootMenu->setTasking()\n#2 /var/www/fog/lib/fog/BootMenu.class.php(146): BootMenu->verifyCreds()\n#3 /var/www/fog/service/ipxe/boot.php(14): BootMenu->__construct(Object(Host))\n#4 {main}\n thrown in /var/www/fog/lib/fog/Host.class.php on line 968
[Wed Nov 26 08:54:15.695129 2014] [:error] [pid 14650] [client 172.18.1.2:53239] PHP Warning: array_filter() expects parameter 1 to be array, null given in /var/www/fog/lib/pages/GroupManagementPage.class.php on line 252, referer: [url]http://172.17.1.5/fog/management/index.php?node=group&sub=add[/url]
[Wed Nov 26 08:55:00.168791 2014] [:error] [pid 1582] [client 172.18.1.2:53241] PHP Warning: array_filter() expects parameter 1 to be array, null given in /var/www/fog/lib/pages/GroupManagementPage.class.php on line 252, referer: [url]http://172.17.1.5/fog/management/index.php?node=group&sub=edit&id=1[/url]
Debian based Location (normally)
/var/log/apache2/error.log
Redhat based Location (normally)
/var/log/httpd/error_log

Have you searched the forums for your issue yet? Yes

Have you checked the [URL=‘http://fogproject.org/wiki’]wiki[/URL] yet? Just found it reading now.

Kernel Issues: [url]http://fogproject.org/wiki/index.php/FAQ[/url]

Ey3