Posts made by elijahkan14

I found out the motherboard I was using was for an All-In-One desktop. I fixed the problem by disabling the internal graphics adapter.

Awesome, thank you so much! Uploading now!

Above that it also says:

[CODE]Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: present[/CODE]

[CODE]Found valid MBR and GPT. Which do you want to use?
1 - MBR
2 - GPT
3 - Create blank GPT
Your answer: _[/CODE]

This is an upload.

It also gives “i8042: No controller found” after loading the kernel.

Using FOG 1.1.2 on Ubuntu 12.10
Client is Windows 7 64-bit (fresh install) on a DH61AGL motherboard. I am able to upload images on hundreds of other clients on this network fine.

I am trying to image a desktop (only has one hard drive) and I am getting to the point where it says:
Looking for Hard Disks…Done
Using Hard Disk /dev/sda

It just hangs there… am I missing something?

The problem was that this was an AIO motherboard and it was trying to use a built in display.
[url]http://www.intel.com/support/motherboards/desktop/sb/CS-033024.htm[/url]

I am also having this problem, except WITH onboard graphics

It works on every computer in the district (200+ computers) except for this lab.

I’m having the same problem on Ubuntu 12.04

bump

I am trying to image these fairly new PC’s with intel motherboard DH61AGL, when I try to do a full host registration it loads bzImage then there’s no signal to the monitor. If I do quick host registration that works and I just have to rename in the database. This wouldn’t be a problem except that the computer does not appear to be uploading the image, just sitting there running with no signal. I was assuming this could be resolved by trying different versions of the kernel but when I try and download a new one in the web gui it gets stuck on “[FONT=Ubuntu][COLOR=#555555]Download Completed! Moving file to TFTP server…”
[COLOR=#000000]I have been able to image hundreds of other computers on this server no problem and only these machines are being diffucult. The monitors are connected via hdmi to the onboard graphics (theres only hdmi no vga or dvi on the board.)[/COLOR][/COLOR][/FONT]
[COLOR=#000000]Any Help will be appreciated.

FOG 1.1.2 on Ubuntu 12.04 (ufw is disabled) [/COLOR]

I just realized one of my storage nodes were removed. Problem solved! I would delete the thread but I don’t see the option.

I didn’t realize FOG provided an uninstall guide :O, thanks!

I am able to access every page in the web gui except the image management page.
OS: Ubuntu Desktop 12.04
FOG: 1.1.2
I’ve attached my apache error log.

[url=“/_imported_xf_attachments/1/1094_error.txt?:”]error.txt[/url]

I had this issue when trying to use Ubuntu 14.04 and I used 12.04 instead and have not had any issues since.

I’m having the exact same issue. Did you ever resolve this?

We got the new server up and running! Out of curiosity I did “do-release-upgrade” on the old server and it offered to overwrite tftpd-hpa during the upgrade, now we have two working FOG servers! Thanks again to everyone!