Posts made by EAHarvey

Have you looked at your compression. Fog 1.2 sets it default to level 9. I had the same issue after upgrading. Look under Fog configuration---->Fog Boot settings—>FOG_PIGZ_COMP. I bet it’s set to 9. Set it to 4 or 5. I run mine at 4 and all works great. Good upload and Download times. You can also set that config on the actually image management of the image itself. Hope this helps.

@EAHarvey So is there a way to have a debug in place in 1.2 so i can see why my uploads for a single disk are erroring out and rebooting?

@EAHarvey Ok that worked like a champ. I did a little digging and found out that the kkpxe allows the machine to use its Manufacturer. Booted straight up when i did that. Going to do some more testing but it’s looking good. I should have my backup machine finished today or tomorrow.

@Wayne-Workman oh crap. lol my bad. checking now.

@Wayne-Workman Yes both of my servers are set to filename “undionly.kpxe”;.

@Wayne-Workman Ok let me double check…

@Wayne-Workman Was that changing the 0.0.0.0:67 or 69 and trying it? If that is waht you mean then yes i have tried on each setting.

@Wayne-Workman Yes that is correct.

@Wayne-Workman the ip of the server is 172.29.2.250 and DHCP is giving an address of .2.25 so seems ok as duplicate addresses. I have dual NICS in the machine. One is my FOG network and the other is standard 192.x.x.x ATT network. I wonder if for some reason it’s trying to grab DHCP from the ATT? If it was though, you would think it would be a issue with all the machines and not just these netbooks. Food for thought.

So new error I have found. Just wanted you guys to be aware. So the Asus EEE PC that i have been having trouble will eventually not time out and get the pxe image and boot all the way into fog and work. It seems to take multiple;e reboots and/or attempts to connect to the server then it goes right through., Not sure if maybe it’s some type of delay but i’m looking into it and trying to figure out what exactly is going on.

@Wayne-Workman Roger that, thats what i was thinking but i wanted to ask the experts.

@Wayne-Workman Quick question, So do i need to run the SVN up or the git pull each day to update? or do i just use one or the other?

I t should be a standard defaults install. Where can i check this and/or change it. Is it inside the tftp info?

Everything is working properly so far except these little Asus EEE PC. I have also ran the single disk option for uploading and it works great. I guess i am going to have to figure out a sort of external imaging for the EEE PC. I don’t want to mess up my production server just for a few old netbooks. Thank you all for all your help.

Ubuntu Server 14.04. I think it has to do with these eee pc netbooks. They have the atheros boot stuff. It seems to work on all my others. I’m going to keep testing. I have a working setup going so I’m not down production wise.

lol now that i have updated my tftp sever is timing out,… Oh my.

Ok awesome. I have it installed and running. Going to start some testing. I’ll let you guys know. Thanks so much for the great help.

Ahh ok, so this is like the currently developing version of FOG. More like a beta.

@Wayne-Workman

I guess I’m not familiar with trunk. Different version than 1.2.0/? Where do i download it?

Forgive me for not knowing this, i was unaware of another version.

I see something about setting up a debug task. I’m going to try this to test also.