@george1421 Your last comment on “default router” made me change the option router settings in dhcpd.conf, which changed the default gateway in my lab client… boom, I can ping 8.8.8.8

Something changed my option router setting back to 192.168.2.1 instead of 192.168.22.99

ok, got it.

My storage pool had the other IP address, once I changed the IP of the storage pool to same subnet has the machine I am trying to clone, it went smoothly.

It is now copying at 257MB/min… is that good ?

Seems to have unstuck after a while, now it just says Clone Successfully. with a blinking cursor.

Good Day,

New Fog install
First image capturing

My Setup is has follow:

Fog on esxi ubuntu22 VM. (1.5.10.1629)
Router is opnsense

I am trying to capture my first disk image for a physical laptop, however,I am stuck at the following message: Saving Partition Tables (MBR).

I have red that FOG doesnt like when there is 2 network interface here

OR that changing to a non resizeable image might help here

I have tried the non resizable image, but not removing a nic. Could that be it ? Any help welcome.

@george1421 How should I disable this option in FOG config file ?

@george1421 Your last comment on “default router” made me change the option router settings in dhcpd.conf, which changed the default gateway in my lab client… boom, I can ping 8.8.8.8

Something changed my option router setting back to 192.168.2.1 instead of 192.168.22.99

@george1421

Ping No go from Lab -> business nic of FOG
Ping No go from Business -> lab nic of FOG

You assumed right.

FOG Server LAB IP: 192.168.22.99
Fog Server Business IP: 192.168.2.99

PRetty hard for me to post the result of ipconfig /all from lab

@george1421 Done, all 3 to ACCEPT now, however, dont work.

BTW, I appreciate your time.

@george1421

xxx@fog-gateway:~$ sudo iptables -F
xxx@fog-gateway:~$ sudo iptables -L

Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy DROP)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Still no go.

@george1421

Same thing for firewalld

as for ufw disable, I tried it, and rebooted, same problem.

@george1421 You are right, can ping but not trough.

As for the other command:

sudo service iptables stop
iptables: unrecognized service