[quote=“Jaymes Driver, post: 26305, member: 3582”]Mysql is working!
You may want to check the following files and verify that the mysql password is correct:
/var/www/fog/commons/config.php [COLOR=#ff0000]below[/COLOR]
/opt/fog/service/etc/config.php [COLOR=#ff0000]comes up with blank doc[/COLOR]
Can you post the contents of your /tftpboot/pxelinux.cfg/default ? [COLOR=#ff0000]below[/COLOR]
You may perform this command from one of your windows machines connected to the hub to verify that it can grab the pxelinux file
[code]
tftp FOGIPADDRESS get pxelinux.0[/code][/quote]
DISPLAY boot.txt
DEFAULT fog.local
LABEL fog.local
localboot 0
LABEL fog.memtest
kernel fog/memtest/memtest
LABEL fog.reg
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=127.0.0.1 mode=autoreg keymap= web=10.10.10.5/fog/ loglevel=4 consoleblank=0
LABEL fog.reginput
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=127.0.0.1 mode=manreg keymap= web=10.10.10.5/fog/ loglevel=4 consoleblank=0
PROMPT 1
TIMEOUT 300
define( “IS_INCLUDED”, true );
define( “TFTP_HOST”, “10.10.10.5” );
define( “TFTP_FTP_USERNAME”, “fog” );
define( “TFTP_FTP_PASSWORD”, “882e1ec394a538f8425014b3eb7171e0” );
define( “TFTP_PXE_CONFIG_DIR”, “/tftpboot/pxelinux.cfg/” );
define( “TFTP_PXE_KERNEL_DIR”, “/tftpboot/fog/kernel/” );
define( “PXE_KERNEL”, “fog/kernel/bzImage” );
define( “PXE_KERNEL_RAMDISK”, 127000 );
define( “USE_SLOPPY_NAME_LOOKUPS”, “1”);
define( “MEMTEST_KERNEL”, “fog/memtest/memtest” );
define( “PXE_IMAGE”, “fog/images/init.gz” );
define( “PXE_IMAGE_DNSADDRESS”, “127.0.0.1” );
define( “STORAGE_HOST”, “10.10.10.5” );
define( “STORAGE_FTP_USERNAME”, “fog” );
define( “STORAGE_FTP_PASSWORD”, “882e1ec394a538f8425014b3eb7171e0” );
define( “STORAGE_DATADIR”, “/images/” );
define( “STORAGE_DATADIR_UPLOAD”, “/images/dev/” );
define( “STORAGE_BANDWIDTHPATH”, “/fog/status/bandwidth.php” );
define( “CLONEMETHOD”, “ntfsclone” ); // valid values partimage, ntfsclone
define( “UPLOADRESIZEPCT”, 5 );
define( “WEB_HOST”, “10.10.10.5” );
define( “WEB_ROOT”, “/fog/” );
define( “WOL_HOST”, “10.10.10.5” );
define( “WOL_PATH”, “/fog/wol/wol.php” );
define( “WOL_INTERFACE”, “eth0” );
define( “SNAPINDIR”, “/opt/fog/snapins/” );
define( “QUEUESIZE”, “10” );
define( “CHECKIN_TIMEOUT”, 600 );
define( “MYSQL_HOST”, “localhost” );
define( “MYSQL_DATABASE”, “fog” );
define( “MYSQL_USERNAME”, “root” );
define( “MYSQL_PASSWORD”, “********” );
define( “DB_TYPE”, “mysql” );
define( “DB_HOST”, MYSQL_HOST );
define( “DB_NAME”, MYSQL_DATABASE );
define( “DB_USERNAME”, MYSQL_USERNAME );
define( “DB_PASSWORD”, MYSQL_PASSWORD );
define( “DB_PORT”, null );
define( “USER_MINPASSLENGTH”, 4 );
define( “USER_VALIDPASSCHARS”, “1234567890ABCDEFGHIJKLMNOPQRSTUVWZXYabcdefghijklmnopqrstuvwxyz_hB()^!” );
define( “NFS_ETH_MONITOR”, “eth0” );
define(“UDPCAST_INTERFACE”,“eth0”);
define(“UDPCAST_STARTINGPORT”, 63100 ); // Must be an even number! recommended between 49152 to 65535
define(“FOG_MULTICAST_MAX_SESSIONS”, 64 );
define( “FOG_JPGRAPH_VERSION”, “2.3” );
define( “FOG_REPORT_DIR”, “./reports/” );
define( “FOG_THEME”, “blackeye/blackeye.css” );
define( “FOG_UPLOADIGNOREPAGEHIBER”, “1” );
define( “FOG_VERSION”, “0.32” );
define( “FOG_SCHEMA”, 23);
DEFINE(‘BASEPATH’, rtrim($_SERVER[‘DOCUMENT_ROOT’], ‘/’) . rtrim(WEB_ROOT, ‘/’));
?>
Dell desktops 7010 and then lats models 6430,7440, and now a 5440 I think is the newest model. Thanks in advance for any advice.
)