Posts made by drew2268

thank you so much

how do i set it for the host or as the default kerenal for all hosts , sorry this is the first time Ive ever done any thing with the kerenals

okay thank you

okay thank you

does the kernel update have to be updated through the server or can it be done through the gui

Okay sorry to ask this but how do i upload that kernel though the web interface, or do i have to do it on the server ?

okay im going to try the kernel ill update shortly with the findings thanks guys for all the help so far

okay thank you would the kernel effect how it boots through a switch and why some devices work and others don’t?

yes the M71z and M72z and hp elite books still upload and deploy with no issues, i also have already contacted lenovo and sent them a pc as well to tested a new bios on the machine here. lenovo states right out of the box the machine works but when they sent the machine back right out of the box it still dint pxe boot and all settings are the same in bios as they left them.

i dont know if this may help but Would knowing my setup help as well, cause to make this even weirder. the m71z, m72z have no problem pxe booting from a dell switch power connect 6224, but when i connect the m73z it never pxes boot . so i decide to take a direct connection from the wall and to the computer and took the switch out of the picture [ATTACH=full]575[/ATTACH] and it pxe boots but hangs here, let me know if this helps

[url=“/_imported_xf_attachments/0/575_rsz_hang_on_pc_from_wall_to_pc.jpg?:”]rsz_hang_on_pc_from_wall_to_pc.jpg[/url]

Im using fog as the DHCP server i have tried 2 other models and the pxe boot with no issues and deploy and upload images, the other models are the m71z, and m72z, ive done hp elite books as well the only machine ive had issues pxe booting so far is the m73z.

ill have to check options 66/67 im not quite sure if i have access to modify it

Yes it does receive and ip address when i boot and image into windows and i have tried a number of different cable with the same out come so far

Ive tried legacy and auto mode on this machine

I have pxe booted before with a m71z and a m72z and they all pxe boot with no error and clone to the host image which is a windows 7 image, but when i try to pxe boot a m73z i get the error above (PXE-E7B), im running fog version .32

Thanks again for helping me figure this issue out

The PXE Error’s that come up after i try to PXE boot is PXE-E7B and PXE-M0F i hope this helps out more

Hi i’m a new to using fog and im trying to PXE boot a new lenovo m73z, that wont connect to my fog server. Its not receiving and ip address from the dhcp server. does any one have any pointers to what i may be doing wrong?