@sebastian-roth Thanks for your valuable reply…
D
Posts made by Dinesh
-
RE: M.2 not recognised during deploying stageposted in FOG Problems
-
RE: M.2 not recognised during deploying stageposted in FOG Problems
@sebastian-roth But few systems having the Samsung 512 M.2 and 1000 Gb Toshiba HDD having in few more systems. is this Kernel support for that variant?
-
RE: M.2 not recognised during deploying stageposted in FOG Problems
@sebastian-roth Is kernels/bzImage-5.10.19-Lexar_M.2 supports both HDD’s and M.2 variants?
-
RE: M.2 not recognised during deploying stageposted in FOG Problems
@sebastian-roth Can you send me the steps to install the patch(kernels/bzImage-5.10.19-Lexar_M.2)
-
RE: M.2 not recognised during deploying stageposted in FOG Problems
@sebastian-roth i have the same issue when registering the system having the M.2 SSD. How can i upgrade the kernel 5.10.23. can you please help me to register and deploy the windows 10
FYI - I using the latest version of the fog itself 1.5.9.63 and kernel version is ( 5.10.19)
-
RE: TFTP need enter manuallyposted in FOG Problems
@Sebastian-Roth im only managing dhcp server. i’m only install fog server.
-
RE: TFTP need enter manuallyposted in FOG Problems
@Sebastian-Roth This is my DHCP Server . . . . . . . . . . . : 192.168.6.15 shown in windows
-
TFTP need enter manuallyposted in FOG Problems
Client system is Boot with PXE and after dhcp is assigned to that system and thereafter every time TFTP IP address need to enter manually, is any thing possible to configure in default settings in fog server.i’m using latest version fog server 1.5.7. -
RE: DHCP address is not assigned for client machine boot with PXEposted in FOG Problems
@Sebastian-Roth yes i checked and now works its fine
-
DHCP address is not assigned for client machine boot with PXEposted in FOG Problems
I install the latest version of fog project and i assign the dhcp and dns ip’s are same as my router ip address. now i boot my client system with PXE mode, thereafter DHCP is not assigned i usually waits long time and automatically exit from the pxe boot. is there any thing i missed the configuration ?