@dholland
After all that - those settings and dhcp image file of ipxe.efi works

I had not tried it with all the other security downgrades… Just takes posting to find the answer!

I have a network with two locations connected via wireless link.
I have my fog server at one site, and a fog repository at the other site.
Is it possible to Copy an image that I have on my main fog server to the repository?

My thought is that when I image computers on the side of the network that hosts the repository I can limit the wireless traffic going across the network.

I am not sure that the server/repository setup will even work this way. My goal is not increased space it is limiting traffic over a WAN.

@dholland
After all that - those settings and dhcp image file of ipxe.efi works

I had not tried it with all the other security downgrades… Just takes posting to find the answer!

I have only had FOG going for 24 hours… Please make no assumptions about what I might know
CentoOS 7 running in Hyper-V
Server 2016 domain running dhcp
Network has multiple V-lans but has been running in the current configuration for 5 years
Juniper network - setup by a Juniper Senior Network Engineer.

FOG trunk updated on 06/07/208 1.5.4
Currently running Kernal 4.17.0 Tom Elliot 64

Optiplex 7050
Current Bios 1.8.3
Built in Intel NIC

The system will not PXE boot with UEFI enabled
Bios settings: enable legacy Option Roms, checked - UEFI Boot Path Security, Never - Secure Boot, Disabled - UEFI Network Stack is Enabled w/PXE

DHCP server option 67 - undionly.kpxe have also tried undionly.kkpxe
Currently the machine is on the same vlan as the server - but not the same physical switch (Juniper EX4200 )

Please help!