Okay i GOT IT!

I noticed that my HP is getting Information from the replicated DHCP Server. Replication was not completed and there was undionly.kpxe instead of ipxe.efi. Changed the String and now its working!!! Thank you for your help!

@Quazz said in Extremely Slow Deploy to NVME drives:

@DeRo93 If available, install firmware updates, BIOS updates and such.

Already done. Nothing helped :/. I hope there will be a Solution in future. We only work with HP. And i think the new one will all get NVME SSD´s… Anyway thank your for your Help.

@Tom-Elliott HP UEFI does not have AHCI - IDE Options in their UEFI Setup
HP says AHCI is activated by default on newer Models.

@Tom-Elliott

Hi,

i tried the Init.xz and the kernel argument. I updated FOG and BIOS from the Notebook. Even tried older BIOS Versions.

With “slow” its like the rate is going to 20 kb / min … it starts with 70 MB / min and then goes lower and lower… Its a Deploy…

SSD in this Notebook is a “sk hynix bc501 hfm256gdjtng-8310a” with the newest firmware.

@Quazz said in Very slow cloning speed on specific model:

@DeRo93 Unfortunately there are some issues on that model with certain SSDs (though not all) that are currently resolved.

I’m unsure where to even point the finger at this point, but extensive attempts from our side have been done with no success.

Another user was using older models to deploy their images to the drive and then put those drives into the G6 model.

Does this mean there is NO other method to get my FOG Image on this Notebook model ?

@Quazz Yes I tried your .xz File. Does not solve the problem for me

I´ts a HP EliteBook 840 G6

@Quazz Maybe its worth a try?

@Quazz Is there a way to create a .xz file for PartClone 0.3.13 ?

@Middle I have the same Problem. Updated FOG and PartClone but it does not help . Did you find another solution?

@Sebastian-Roth

ah okay. Unfortunately this does not helped and im not able to deploy images on the HP Elitebook 840 G6.

Do you have any other suggestions :/?

@Quazz

Same here with the “nvme_core.default_ps_max_latency_us=5500 not a valid identifier” problem…