I have already looked through the following threads and places to look for a solution:
[url]http://www.fogproject.org/wiki/index.php?title=Unable_to_connect_to_TFTP[/url]
[url]http://fogproject.org/forum/threads/unable-to-connect-to-tftp-server.85/#post-770[/url]
[url]http://fogproject.org/forum/threads/unable-to-connect-to-tftp-server.537/[/url]

all these are basically telling me to change the fog user password on the server. The only problem I’m running into now is that I can not locate any such user.

Alright thanks we will check it out.

We are not imaging through VPN, but we have 2 switches both of which are 100 meg. The switches don’t appear to be faulty. The PC’s image anywhere from 500 MB/min to 1 GB/min which is the speed they always have. The weird thing is there is no broadcast traffic at all so I’m trying to figure how to monitor what is happening to the network.

No just unicast. Follow up question: Do you have any tips for resolving a bottleneck? Because other system issues that we’ve had kind of point to that too.

I’ve been using FOG at my callcenter for the past couple of months, and haven’t ran into an issue with network traffic. Recently every time we image a machine the rest of the computers on the network lose connectivity. Any idea why this would happen?

The image is a single partition so it can be re-sized

So I’m guessing there is no easy fix to it?

I’m trying to image a machine. Once the image is complete when you try to boot from the hard disk it there is just a blank screen. I thought it might be an issue with the computer, but I put the image of what the machine used to be, and it works. That lead me to believe it was an issue with the image file itself, but I have put that same image on multiple different machines. Any help would be appreciated.