I have successfully deployed a multi-hardware image to various HP computers (DX 2200, DX2400, PRO 2420, PRO 3010, PRO 3300 PRO 3400)

However, HP 500B MT will not pxe boot, keeps giving the following :

TFTP.
PXE-T01: File not found
PXE-E3B: TFTP Error - File not found
PXE-M0F: Exiting PXE ROM.

I have had the motherboard replaced, and setup Windows XP from a CD and checked networking, and this is fine.

Any ideas why this is not working? Need this model to work as we want to use FOG to deploy Windows 7 later in the year to around 200 computers.

I have not had a chance to test the settings, and am a little reluctant as it works on all the other hardware we have here. You are more than welcome to try the settings advised by Aaron Johnson.

Regards

Damindra

I will try the settings first before starting to look at ProxyDHCP

many thanks for all your help on this

kind regards

Damindra

I have checked the /etc/default/tftpd-hpa file and it has the following entries:

/etc/default/tftpd-hpa

FOG Modified version

TFTP_USERNAME=“root”
TFTP_DIRECTORY="/tftpboot"
TFTP_ADDRESS=“0.0.0.0:69”
TFTP_OPTIONS="-s"
so the TFT_DIRECTORY setting seems correct?
Found that there is NO /srv/tftp but /srv/ftp?
further help if very welcome!

Thank you for the reply and I will take a look and see. Strange how it only affects HP 500B Workstations, and all other models, older and newer than this particular model work!

Will let you know if this resolved my issue.