Posts made by Cyril

@tom-elliott
Originally I wanted to keep the image without installation as I did at the time … I will experiment with domain integrations. And the multicast (At the time it saturated the network … :))

If you need help with this model, I can help you with this type of device and the RAID mode to do kernel tests. I am at your disposal.
We bought them a month ago.

@george1421

This is a Dell Optiplex 7080. If you need more information on the model please do not hesitate.

I have been using FOG for years and it will bother me to change it’s a good job!

Hello,

I was able to get by by changing the RAID to AHCI with this procedure:

Click the Start Button and type cmd
Right-click the result and select Run as administrator
Type this command and press ENTER: bcdedit / set {current} safeboot minimal (ALT: bcdedit / set safeboot minimal)
Restart the computer and enter BIOS Setup
Change the SATA Operation mode to AHCI from either IDE or RAID
Save changes and exit Setup and Windows will automatically boot to Safe Mode.
Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
Type this command and press ENTER: bcdedit / deletevalue {current} safeboot (ALT: bcdedit / deletevalue safeboot)
Reboot once more and Windows will automatically start with AHCI drivers enabled.

https://support.thinkcritical.com/kb/articles/switch-windows-10-from-raid-ide-to-ahci

Regards

@sebastian-roth
Hello,

I did the test with the system installed and not installed.
I browsed the forum to find an article on changing from RAID to AHCI and possible boot problems but I did not find my happiness

Regards

@george1421
Hello,

Thank you for the information.
Here are the tests (inconclusive)

bzImage5102

bzImage5618RT3

Regards

Hello,

We have different PCs that we can’t seem to use Fog in RaidOn instead of AHCI.
Modification of the secure boot and SATA Raid On mode to AHCI => Ok for FOG however the system can no longer start.
Another option to change? The ideal would be to be able to use the RaidOn mode.

Do you have any idea how to make the system boot in AHCI anyway?

FOG version: 1.5.9.57
Kernel: 5.6.18

Regards